Krups Intuition Preference EA873810 - Инструкция по эксплуатации - Страница 50

48

PROBLEM

CORRECTIVE ACTIONS

Maintenance

After having filled the water 
tank, the warning lights 
remain on.

Check the correct positioning of the tank in the 
appliance.
The floats at the bottom of the tank must move 
freely. Check and unlock the floats if necessary.

Drinks

The coffee is flowing too 
slowly.

Turn the “grinding fineness” button to the right 
to obtain a coarser ground coffee (depending on 
the type of coffee used).
Perform one or several rinsing cycles.
Change the Claris Aqua Filter System cartridge.

The coffee is too light or 
not full-bodied enough.

Avoid the use of oily, caramelised or flavoured 
coffees.
Check that the bean container contains coffee 
and that it is moving down correctly.
Decrease the volume of the drink and increase 
the strength of the drink using the DARK 
function.
Turn the “grinding fineness” button to obtain a 
finer ground coffee.
Make your drink in two cycles using the 2-cup 
function.

The espresso or the coffee 
is not hot enough.

Rinse the coffee circuit before you start to make 
your coffee.
Increase the temperature of the coffee in the 
machine settings.
Heat the cup by rinsing it with hot water before 
starting to prepare the drink.

Clear water drips from the 
coffee nozzles before each 
coffee is made.

During the pre-infusion function, water may 
escape from the coffee nozzles.

If one of the problems outlined in the table persists, contact KRUPS Consumer Service.

Caution:

Manufacturer:
SAS GSM
Rue Saint-Léonard F-53104 Mayenne
France