Krups Intuition Preference EA873810 - Инструкция по эксплуатации - Страница 48

46

PROBLEMS AND CORRECTIVE ACTIONS

PROBLEM

CORRECTIVE ACTIONS

Operation

The machine displays a 
fault, the software is frozen.
OR
Your machine has a 
malfunction.

Turn off and unplug the machine, remove the 
filter cartridge, wait 1 minute and restart the 
machine.
Press and hold the ON/OFF button for at least 3 
seconds to start.

The appliance does not 
turn on after pressing the 
ON/OFF button (for at least 
3 seconds).

Check the fuses and the power socket of your 
electrical installation.
Check that the two power plugs are correctly 
inserted into the socket.

A power failure has 
occurred during a cycle.

The appliance resets automatically when it turns 
back on.

The grinder stops while 
making the drink and the 
bean LED lights up.

Add beans and press start.

Grinder turns empty.

The machine self-learns.

Use

The grinder makes an 
abnormal noise.

Foreign bodies are surely present in the grinder.

There is water under the 
appliance.

Before removing the water tank, wait 15 seconds 
after the flow of coffee so that the machine 
finishes its cycle correctly.
Verify that the drip tray is well positioned on the 
machine. It must always be in place even when 
the machine is not in use.
Verify that the drip tray is not full.

The adjustment button for 
the grinding fineness is 
difficult to turn.

Turn the grinding fineness adjustment button 
only when the grinder is operating.

The appliance has not 
issued any coffee.

An incident has been detected during its making.
The appliance is reset automatically and is ready 
for a new cycle.

You have used ground 
coffee instead of coffee 
beans.

Use your vacuum cleaner to collect the ground 
coffee contained in the bean container.

Water flows from the coffee 
nozzles when the machine 
stops.

Automatic rinsing for cleaning the coffee nozzles 
and prevent clogging.