Krups Intuition Essential (EA870810) - Инструкция по эксплуатации - Страница 27

48

PROBLEM

CORRECTIVE ACTIONS

Maintenance

The machine does not request 
descaling.

The descaling cycle is requested after a large number 
of steam nozzle uses.

Some grounds are in the drip 
tray. 

A small amount of ground coffee can get into the drip 
tray. The machine is designed to evacuate any excess 
ground coffee so that the percolation zone remains 
clean.

The warning messages are 
still displayed after the coffee 
grounds collector is emptied.

Reinstall the coffee grounds collector.

Maintenance

After having filled the water 
tank, the warning lights remain 
on.

Check the correct positioning of the tank in the 
appliance.
The floats at the bottom of the tank must move freely. 
Check and unlock the floats if necessary.

Drinks

The coffee is flowing too 
slowly.

Turn the “grinding fineness” button to the right to 
obtain a coarser ground coffee (depending on the 
type of coffee used).
Perform one or several rinsing cycles.
Change the Claris Aqua Filter System cartridge.

The coffee is too light or not 
full-bodied enough.

Avoid the use of oily, caramelised or flavoured coffees.
Check that the bean container contains coffee and 
that it is moving down correctly.
Decrease the volume of the drink and increase the 
strength of the drink using the DARK function.
Turn the “grinding fineness” button to obtain a finer 
ground coffee.
Make your drink in two cycles using the 2-cup 
function.

The espresso or the coffee is 
not hot enough.

Rinse the coffee circuit before you start to make your 
coffee.
Increase the temperature of the coffee in the machine 
settings.
Heat the cup by rinsing it with hot water before 
starting to prepare the drink.

Clear water drips from the 
coffee nozzles before each 
coffee is made.

During the pre-infusion function, water may escape 
from the coffee nozzles.

If one of the problems outlined in the table persists, contact KRUPS Consumer Service.

Caution:

Manufacturer:
SAS GSM
Rue Saint-Léonard F-53104 Mayenne
France