Krups Arabica Espresso (EA811010) - Инструкция по эксплуатации - Страница 16

16

BEVERAGE PREPARATION

TYPES OF 

COFFEE

Number of cups

possible

Possible volume 

settings (ml) 

Possible strength 

settings

RISTRETTO

1

20 to 30 ml 

 or 

2 x 1

2 x 20 to 30 ml

in two cycles

ESPRESSO

1

30 to 70 ml 

 or 

2 x 1

2 x 30 to 70 ml

in two cycles

COFFEE or LUNGO 

1

80 to 220 ml 

 or 

2 x 1

2 x 80 to 220 ml

in two cycles

BEFORE FIRST USE

Preparing the appliance

Pull out and fill the water tank - 

Fig. 1 and 2

.

Put it back in place by pressing firmly and close the lid again - 

Fig. 3

. 

Open the coffee bean container lid. Add the coffee beans - 

Fig. 4

.

Close the coffee bean container lid again.

Do not fill the water tank with hot water, milk or any other liquid.

 If you turn on the appliance when the water 

tank is not in place or not correctly filled (under the “min.” level,), the 

 light will come on and making an espresso 

or a cup of coffee will be made impossible.

 NEVER PUT GROUND COFFEE IN THE COFFEE CONTAINER.

It is recommended that you do not use oily, caramelised or flavoured coffee beans for this appliance. These kinds of 

beans may damage the appliance.

Check that the coffee beans do not contain any foreign particles such as grit, as any damage caused by the presence 

of foreign particles will invalidate the guarantee.

Do not put water into the coffee bean container.

Remember to fit the drip tray to avoid waste water flowing onto the work surface and staining it or scalding you.

Check that your water tank is clean.

Initialisation cycle - total duration: around 3 minutes

Turn on the appliance by pressing the button 

 - 

Fig. 5

. The light 

 is constant.

Put a container with a minimum capacity of 0.6 litres underneath the two coffee outlets and steam nozzle.

Press the 

 - 

Fig. 6

 button: the appliance starts the initialisation cycle for rinsing of the steam and coffee circuits. The 

light 

 flashes.

The cycle is finished when the light 

 becomes constant. The appliance is now ready to use.

It is preferable to rinse the 2 circuits out at least once after the appliance has not been used for several days. Each 

time you plug your appliance in, it will carry out an initialisation cycle.

Preparing the grinder

You can choose the strength of your coffee by setting the coffee bean grinding fineness. The finer the grinding setting, 

the stronger and creamier the coffee should be. Set the desired fineness for grinding by turning the ‘Grinding fineness 

setting’ knob.Turn to the left for finer grind. Turn to the right for coarser grind.

 CHANGE THE SETTING DURING GRINDING.

Never force the grinding fineness setting button.