Neff C17KS61G0 - Инструкция по эксплуатации - Страница 59

 59

en

Service programmes

F

Important:

 Before starting each 

service program (Descale, Clean or 

Calc’nClean) remove the brewing unit, 

clean as instructed and replace it. 

Be careful not to jam the milk tube 

when closing the door. 

After completion of each service 

programme, wipe the appliance 

immediately with a soft, damp cloth 

to remove any residues from the 

descaling and cleaning solution. It is 

possible for corrosion to form under-

neath such deposits.  

New sponge cloths may contain 

salts. Salts can cause rust film on 

stainless steel and must therefore be 

washed out thoroughly before use.  

Clean the beverage outlet, milk tubes 

and connecting piece thoroughly.
Specially developed, suitable 

descaling and cleaning tablets are 

available from retail outlets or from 

customer services (see the section 

“Accessories”).

F

Using a water filter increases the 

intervals until a descaling pro-

gramme needs to be performed.

Descaling

Takes about 21 minutes.

■

Touch 

E

.

■

Select 

“Descale”

 with the 

K

 or 

L

arrow button.

■

Touch 

C

. The display indicates the 

progress of the programme.

■

Empty the drip trays and replace.

■ Remove the water filter (if there is one) 

and press 

C

.

■

Pour lukewarm water into the empty 

water tank up to the “0.5 l” mark and 

then dissolve one Neff descaling tablet 

00576693 in it. 

F

If there is not enough descaling 

solution in the water tank, you will be 

asked to do the following. Refill using 

uncarbonated water and press 

C

again.

■ Remove the suction pipe from milk 

container, wipe it and insert the end of the 

suction pipe into the hole on the coffee 

grounds container.

■

Close the appliance door.

■

Place a container with a capacity of 

0.5 litre under the beverage outlet.

■

Touch 

C

. The descaling programme 

will now run for about 19 minutes.

■ Remove the container and touch 

C

.

■ Rinse the water tank and (if removed) 

replace the water filter.

■

Fill the tank with fresh water up to the 

“max” indicator.

■ Replace the water tank and close the 

door.

■

Place the container underneath the bev-

erage outlet again.

■

Touch 

C

. The descaling programme 

will now run for about 2 minutes and rinse 

the appliance.

■ Remove the container, empty the drip 

trays, replace and close the appliance 

door.

■

Touch 

C

. The appliance has finished 

descaling and is ready for use again.

■

Touch 

E

 to exit the programme.

Cleaning

Takes about 5 minutes.

■

Touch 

E

.

■

Select 

“Clean”

 with the 

K

 or 

L

 arrow 

button.

■

Touch 

C

. The display indicates the 

progress of the programme.

■

Clean the beverage outlet and replace, 

empty the drip trays and replace.

■

Open the ground coffee drawer, drop in 

a cleaning tablet and close the coffee 

drawer again.

■

Close the appliance door.

■

Place a container with a capacity of 

0.5 litre under the beverage outlet.

■

Touch 

C

. The cleaning programme will 

now run for about 5 minutes.

■ Remove the container, empty the drip 

trays, replace and close the appliance 

door.