Bosch TES80721RW VeroSelection 700 - Инструкция по эксплуатации - Страница 17

13

TES80..  |  04/2013

en

 Contrast

The display 

5

 contrast can be set from 

–10

to 

+10

. The factory setting is 

+0

.

●

Turn the rotary knob 

6

 to select the 

required setting.

 Water  hardness

●

Turn the rotary knob 

6

 to select the 

required water hardness 

1, 2, 3

 or 

4

.

Info: 

It is important to set the water hard-

ness correctly, so that the appliance indi-

cates accurately when the descaling pro-

gramme should be run. The factory setting 

for the water hardness is 

4

. 

You can check the water hardness using 

the enclosed test strip or by asking your 

local water supplier. 

● Dip the test strip briefl y in water and 

check the result after one minute.

Level Water hardness

German (°dH) French (°fH)

1

2

3

4

1-7

8-14

15-21

22-30

1-13

14-25

26-38

39-54

 Water  filter

A new water fi lter 

29

 must be rinsed before 

it can be used. 

● To do this, press the water fi lter 

29

 fi rmly 

into the water tank 

11

 with the aid of the 

measuring spoon 

14

. Fill the water tank 

with water up to the “

max

” mark. 

●

Turn the rotary knob 

6

 to select 

start

and press the 

start

 button 

8

.

Pl ace 1 l container

Pl ace suction pipe in container 



start

● Place a container with a capacity of 1 litre 

under the milk frother 

10

.

●

Place the end of the suction pipe 

10d

 in 

the container.

●

Press the 

start

 button 

8

. Water will now 

fl ow through the fi lter 

29

 to rinse it.

● Next, empty the container. 

The appliance is ready for use again. 

Info: 

Rinsing the fi lter 

29

 simultaneously 

activates the setting for the “change fi lter” 

display. 

You can fi nd detailed information about the 

water fi lter in the enclosed fi lter instructions.

The fi lter 

29

 is no longer effective when the 

Service - change filter

 display appears, or 

at the latest after two months. It needs to be 

replaced for reasons of hygiene and so that 

there is no build-up of limescale (this could 

damage the appliance).

Replacement fi lters can be obtained from 

retailers (TCZ7003) or from customer 

service (575491).

TES803_805_807_1RW.indb   13

08.05.2013   14:52:59