Источники бесперебойного питания APC 10000 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
11
Easy UPS SRV Series Rack-Mount 6000VA, 10000VA
LCD Display Icons
On Line:
The UPS is drawing utility power and performing double conversion to supply
power to the connected equipment.
On Battery:
The UPS is supplying battery backup power to the connected equipment.
Replace Battery:
The battery is not connected securely or the battery is nearing the end of
its service life and should be replaced.
Bypass
: The UPS is in bypass mode, sending utility power directly to connected equipment.
Bypass mode operation is the result of an internal UPS event or an overload condition.
Under this condition, see “Alarms” on page 12 and “Notifications” on page 14 in this
manual. This icon in combination with Green Mode icon, indicates that the UPS is in green
mode operation.
ALARM
System Alarms:
An internal fault is detected. See “Alarms” on page 12 in this manual.
Overload:
The equipment connected to the UPS is drawing more power than rated.
Battery Charge:
The battery charge level is indicated by the number of bar sections
illuminated. When all five blocks are illuminated, the battery is fully charged. Each bar
represents approximately 20% of the battery charge capacity.
Load Level:
The load percentage is indicated by the number of load bar sections
illuminated. Each bar represents approximately 20% of the maximum load capacity.
Mute:
An illuminated line through the icon indicates that the audible alarm is disabled.
Green Mode
: An illuminated icon indicates that the unit is working in Green mode. The
connected equipment is receiving the utility input directly as long as the input voltage and
frequency are within the configured limits.
Alarm or notification:
The UPS has detected an error or the UPS is in configuration mode.
See “Notifications” on page 14 in this manual.
Event:
The icon is illuminated when the user is viewing the event log.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
