Bosch KGN56HI20R - Инструкция по эксплуатации - Страница 14

en

14

Home Connect setup

Notes

■

Observe the Home Connect 

supplementary sheet, which is 

available for download under http://

www.bosch-home.com with the 

instructions. To do so, enter the 

E-number of your appliance in the 

search field.

■

After switching on the appliance, wait 

at least two minutes until internal 

device initialisation is complete. Only 

then start setting up Home Connect.

■

To make settings with Home Connect, 

the Home Connect app must be 

installed on your mobile device. 

Please observe the Home 

Connect documents supplied for 

doing this.Follow the steps specified 

by the app to make the settings.

■

If the appliance is not operated for a 

long time, the Home Connect menu 

closes automatically. You can find 

information on how to open the Home 

Connect menu at the start of the 

appropriate sections.

Automatic connection with the home 

network (WLAN)

If a WLAN router with WPS function is 

available, you can automatically connect 

the refrigerator to the home network.
1. Press the super button and the lock/

alarm off button simultaneously to 

open the Home Connect menu. 
The display shows 

Cn

.

Note

Press both buttons at exactly the 

same time.Button operation is locked 

if only the lock/alarm off button is 

pressed for a longer period. Press the 

lock/alarm off button again until the 

lock is deactivated.

2. Press the °C button repeatedly until 

the displays 

AC

 and 

oF

 are shown.

3.  Press the + button.

The appliance is ready for automatic 

connection.
The display shows an animation for 

2 minutes.
Follow the steps below during this 

period.

4. Activate the WPS function on the 

home network router (e.g. using the 

WPS/WLAN button; information on this 

topic can be found in the router 

documentation).

■

If the connection is successful, 

on

flashes in the refrigerator display.
You can now connect the 

refrigerator with the app.

■

If the display shows 

oF

, it was not 

possible to establish a connection.
Check whether the refrigerator is 

located within the range of the 

home network (WLAN).
Repeat the process or establish the 

connection manually.