Bosch KGN56HI20R - Инструкция по эксплуатации - Страница 11

en

11

Switching on the 

appliance

1. First insert the plug into the 

connection on the back of the 

appliance. Check that the plug has 

been inserted all the way.

2. Then insert the other end of the cable 

into the socket.

The appliance is now switched on and a 

warning signal sounds.
Press the lock/alarm off button to switch 

off the audible warning signal.
The – ALARM – display goes out when 

the appliance has reached the set 

temperature.
The preset temperatures are reached 

after several hours. Do not put any food 

in the appliance beforehand.
The factory has recommended 

the following temperatures:

■

Freezer compartment: -18 °C

■

Refrigerator compartment: +4 °C

Operating tips

■

After the appliance has been switched 

on, it may take several hours until the 

set temperatures have been reached.

■

The fully automatic NoFrost system 

ensures that the freezer section 

remains free of ice. Defrosting is no 

longer required.

■

If the door cannot be immediately re-

opened after it has been closed, wait 

until the resulting low pressure has 

equalised.

■

The front and side panels 

of the housing are partly heated 

slightly.This prevents condensation 

from forming.

Setting 

the temperature

Fig. 

$

Refrigerator section

The temperature can be set from +2°C 

to +8°C.
1. Select the refrigerator section using 

the °C button.

2. Keep pressing the +/- buttons until the 

required temperature is indicated.

Perishable food should not be stored 

above +4 °C.

Freezer compartment

The temperature can be set from -16°C 

to -24°C.
1. Select the freezer compartment using 

the °C button.

2. Keep pressing the +/- buttons until the 

required temperature is indicated.