Oursson BM1023JY/GA - Инструкция по эксплуатации - Страница 16

16

• 

If the defect of the product is associated with 

its use in conjunction with additional equipment 

(accessories), other than additional equipment 

recommended by OURSSON AG for use with this 

product. OURSSON AG is not responsible for the 

quality of the additional equipment (accessories) 

manufactured by third parties, for the quality of its 

products together with such equipment, as well as 

the quality of the work of the additional equipment of 

OURSSON AG together with the products of other 

manufacturers.

6.  Product defects detected during the lifetime of the 

product are eliminated by the authorized service cent-

ers (ASC). During the warranty period, elimination of 

defects is free of charge with the presentation of the 

original  certificate  of  guarantee  and  documents  that 

confirm the fact and date of the contract of retail pur

-

chase. In the absence of such documents, warranty 

period is calculated from the date of manufacture of 

goods. It should be taken into account:

• 

Setup and Installation (assembly, the connection, 

etc.) of the product described in the documentation 

attached to it, does not enter the scope of warranty 

OURSSON AG and can be performed by the user 

as well as the specialists of most authorized service 

centers on a paid basis.

• 

Work upon maintenance of products (cleaning and 

lubricating the moving parts, replacement of con-

sumables and supplies, etc.) are made on a paid 

basis.

7.  OURSSON AG is not responsible for any damage di-

rectly or indirectlycaused by their products to people, 

pets, property, if it occurred as a result ofnon-obser-

vance of the rules and conditions of use, storage, 

transportation or installation of the product, intentional 

or negligent actions of consumer or third parties.

8.  Under no circumstances, OURSSON AG is not 

responsible for any special, incidental, indirect or con-

sequential loss or damage, including but not limited 

to: lost profits, damages caused by interruptions in the 

commercial, industrial or other activities, arising from 

the use of or inability to use the product.

9.  Due to continuous product improvement, design ele-

ments  and  some  technical  specifications  are  subject 

to change without prior notice from the manufacturer.

Using the product when after the terms of use (life-

time):

1.  Lifetime set by OURSSON AG for this product applies 

only when the product is used exclusively for personal, 

family or household needs, as well as the consumer 

observes the correct operation, storage and trans-

portation of products. Under thecondition of careful 

handling of the product and compliance with the rules 

of operation the actual life may exceed the lifetime set 

by OURSSON AG. 

2.  At the end of the product lifetime, you should contact 

an authorized service center for to conduct a pre-

ventive maintenance of the product and determine 

the suitabilityfor further use. Work on conducting 

a preventive maintenance of the products is also 

made in service centers on paid basis.

3.  OURSSON AG does not recommend the use of this 

product after the end of its lifetime without its preven-

tive maintenance by the authorized service center, 

since inthis case, the product can be dangerous to the 

life, health or property of the consumer.

Product Recycling and Disposal

This appliance has been identified in accordance with the 

European directive 2002/96/EG on Waste Electrical and 

Electronic Equipment – WEEE.

After the expiration of the lifetime, the product cannot be 

disposed with another household waste. Instead, it shall be 

deposited in the appropriate recycling collection point for 

electrical and electronic equipment for proper treatment and 

disposal in accordance with federal or local law. By disposing 

correctly this product, you will help to conserve natural re-

sources and preventing the product from damaging 

the environment and human health. For more infor-

mation on the collection point and recycling of this 

product, please contact your local municipal authori-

ties or the enterprise for household waste disposal.

Date of manufacture

Each product has a unique serial number in the form of 

alphanumeric row and is duplicated with a barcode that 

contains the following information: name of the product 

group, date of manufacture, serial number of the product.

Serial number is located on the rear of the product, on 

the package and the warranty card. 

 The first two letters-correspondence to the product 

group (BM - breadmaker).

 The first two digits – year of manufacture.

 The second two digits – month of manufacture.

 The last two digits – serial number of product.

To avoid misunderstandings, we highly rec-

ommend you to read carefully the instruction 

manual and the warranty obligations. Check 

the correctness of the warranty card. War-

ranty card is valid only if the following are cor-

rectly and clearly stated: model, serial num-

ber, date of purchase, clear stamps, buyer’s 

signature. The serial number and the model 

of the device must be the same as in the war-

ranty card. If these conditions are not fulfilled 

or the data specified in the warranty card was 

changed, the warranty card is invalid.

BM1910011234567

1 2 3

4