ADA Plodder KW55 А00421 - Инструкция по эксплуатации - Страница 16

Plodder 

K28 / KW30 / KW55

1

4. Replace oil drain screw and tighten with wrench.

Drain fuel tank

Proceed as follows to empty generator’s fuel tank:
1. Place the catchment tank beside the generator. The catchment tank capacity varies depending on the model(6 or 26 litres). Push fuel 
valve switch to the OFF position.
2. Carefully disconnect fuel pipe from carburettor and allow to drain into catchment tank.
3. Push fuel valve switch to the ON position.
4. Push fuel valve switch to the OFF position
Used or residual operating materials should be disposed of according to the locally applicable recycling regulations for the protection of 
the environment.

Conservation of engine

These requirements must be fulfilled:
 

-Appliance is turned off

- No more fuel in the tank

- Fuel valve in OFF position.

1. Remove spark-plug connector
2. Remove spark-plug with a spark-plug wrench.
3. Apply approx. 1 ml oil to the spark-plug aperture.
4. Screw spark-plug back in and tighten.
5. Pull the starter cable several times slowly so that the oil is distributed around the engine compartment.
6. Re-insert the spark-plug connector.