Einhell GC-PM 51/2 S HW B&S - Инструкция по эксплуатации - Страница 26

GB

- 26 -

9. Troubleshooting guide

Warning: Switch off the engine and pull out the spark plug boot before making any checks or adjust-

ments.

Warning: If, after making an adjustment or repair to the engine, you let it run for a few minutes, remem-

ber that the exhaust and other parts will get hot. Do not touch these parts as they may burn you.

Important. If problems arise in connection with the engine, please refer to the enclosed manual 

from Briggs & Stratton.

Fault

Possible cause

Remedy

The equipment 

does not operate 

smoothly and vibra-

tes intensively

-   Bolts loose

-   Blade attachment is loose

-  Blade imbalanced

-   Check bolts

-   Check blade attachment

-   Replace blade

The engine does 

not start

-   Engine start/stop lever is not 

pressed

-   Throttle lever in wrong position (if 

provided)

-   Spark plug defective

-   Fuel tank empty

-  Fuel pump (primer) not actuated (if 

provided)

-   Press the engine start/stop lever

-   Check setting (if provided)

-   Replace spark plug

-   Top up fuel

-   Actuate the fuel pump (primer) (if 

provided)

Engine does not run 

smoothly

-   Air filter dirty

-   Spark plug dirty

-   Clean the air filter

-   Clean the spark plug

Lawn turns yellow, 

uneven cut

-   Blade is not sharp

-   Cutting height too small

-   Engine speed too low

-   Sharpen blade

-   Adjust to the proper height

-   Set the throttle lever to max. (if pro-

vided)

Grass chute is not 

clean

-   Engine speed too low

-   Cutting height too small

-   Blade is worn

-   Grass bag is clogged

-   Set the throttle lever to max.

-   Set properly

-   Replace the blade

-   Empty the grass bag

The reprinting or reproduction by any other means, in whole or in part, of documentation and papers 

accompanying products is permitted only with the express consent of the iSC GmbH. 

Subject to technical changes

Anl_GC_PM_51_2_SHWBS_SPK7.indb   26

23.09.14   10:26