Makita TL065DZ - Инструкция по эксплуатации - Страница 10

10 ENGLISH

For cordless angle impact wrench

Hold the tool firmly and place the impact socket over 

the bolt or nut. Turn the tool on and fasten for the proper 

fastening time.

► 

Fig.19

The fastening torque is affected by a wide variety of 

factors including the following. After fastening, always 

check the torque with a torque wrench.
1. 

When the battery cartridge is discharged almost 

completely, voltage will drop and the fastening 

torque will be reduced.

2. 

Impact socket
• 

Failure to use the correct size impact socket 

will cause a reduction in the fastening torque.

• 

A worn impact socket (wear on the hex end 

or square end) will cause a reduction in the 

fastening torque.

3. Bolt

• 

Even though the torque coefficient and the 

class of bolt are the same, the proper fasten-

ing torque will differ according to the diame-

ter of bolt.

• 

Even though the diameters of bolts are the 

same, the proper fastening torque will differ 

according to the torque coefficient, the class 

of bolt and the bolt length.

4.  The use of the universal joint or the extension 

bar somewhat reduces the fastening force of the 

impact wrench. Compensate by fastening for a 

longer period of time.

5. 

The manner of holding the tool or the material 

of driving position to be fastened will affect the 

torque.

6. 

Operating the tool at low speed will cause a reduc-

tion in the fastening torque.

NOTE:

 Hold the tool pointed straight at the bolt or nut.

NOTE:

 Excessive fastening torque may damage the 

bolt/nut or impact socket. Before starting your job, 

always perform a test operation to determine the 

proper fastening time for your bolt or nut.

MAINTENANCE

CAUTION:

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before attempting to perform inspection or 

maintenance.

NOTICE:

Never use gasoline, benzine, thinner, 

alcohol or the like. Discoloration, deformation or 

cracks may result.

To maintain product SAFETY and RELIABILITY, 

repairs, any other maintenance or adjustment should 

be performed by Makita Authorized or Factory Service 

Centers, always using Makita replacement parts.

OPTIONAL 

ACCESSORIES

CAUTION:

These accessories or attachments 

are recommended for use with your Makita tool 

specified in this manual.

 The use of any other 

accessories or attachments might present a risk of 

injury to persons. Only use accessory or attachment 

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service 

Center.
• 

Driver bits

• 

Bit piece

• 

Straight head

• 

Ratchet head

• Socket
• 

Socket adapter

• 

Extension bar

• 

Universal joint

• 

Socket bit adapter

• 

Makita genuine battery and charger

NOTE:

 Some items in the list may be included in the 

tool package as standard accessories. They may 

differ from country to country.