Ecosoft P’URE Balance - Инструкция по эксплуатации - Страница 34

34

This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2021

REVERSE OSMOSIS SYSTEM INSTALLER AND USER GUIDE

6. 

USAGE

Use care when removing sealing rings from the ends of the sleeve. The rings serve to protect the 

lamp and electrical connections from water leaks.

UV lamps should be handled with care and only held by the ceramic ends, because contaminat-

ing the quartz surface will reduce germicidal efficiency and shorten service life. Use cotton gloves 

while handling UV lamps.

1.

Disconnect the UV lamp from the power supply.

2.

Shut off the feed valve 

5

 and tank valve 

6

.

3. 

4. 

5. 

6.

7.

8.

Remove the black PVC end cap with wire hole. 

Remove the lamp from the quartz sleeve by pulling on its base.

Do NOT touch the bulb!

Disconnect the power connector holding the lamp by its base.

Insert the new lamp half way into the quartz sleeve.

Properly connect the power connector.

Push the new lamp all the way into the housing and put the

PVC cap on its end.

9.

Restore the water supply to the unit and check if tightness of quartz sleeve sealing has not been disrupted during lamp 

replacement.

10.

Plug  UV  lamp  adapter  in  a  socket  and  verify  that  the  new  UV  lamp  is  functioning  properly.  This  will  be  confirmed  by 

continuous green LED light on the adapter.