WORX WG368E - Инструкция по эксплуатации - Страница 11

Cordless Chain Saw 

EN

11

4) POWER TOOL USE AND CARE 

a)  Do not force the power tool. Use the 

correct power tool for your application. 

The correct power tool will do the job 
better and safer at the rate for which it was 
designed. 

b) Do not use the power tool if the switch 

does not turn it on and off. Any power 

tool that cannot be controlled with 

the switch is dangerous and must be 

repaired.

c)  Disconnect the plug from the power 

source and/or the battery pack from 

the power tool before making any 

adjustments, changing accessories, or 

storing power tools. Such preventive 

safety measures reduce the risk of 

starting the power tool accidentally. 

d) Store idle power tools out of the reach 

of children and do not allow persons 

unfamiliar with the power tool or these 

instructions to operate the power 

tool. Power tools are dangerous in the 

hands of untrained users. 

e)  Maintain power tools. Check for 

misalignment or binding of moving 

parts, breakage of parts and any other 

condition that may affect the power 

tool’s operation. If damaged, have 

the power tool repaired before use. 

Many accidents are caused by poorly 

maintained power tools. 

f)  Keep cutting tools sharp and clean. 

Properly maintained cutting tools with 

sharp cutting edges are less likely to 

bind and are easier to control. 

g) Use the power tool, accessories and 

tool bits etc. in accordance with these 

instructions, taking into account the 

working conditions and the work to 

be performed. 

Use of the power tool for 

operations different from those intended 
could result in a hazardous situation. 

5) BATTERY TOOL USE AND CARE

a)  Recharge only with the charger 

specified by the manufacturer. 

A charger 

that is suitable for one type of battery pack 
may create a risk of fire when used with 
another battery pack.

b) Use power tools only with specifically 

designated battery packs.

 Use of any 

other battery packs may create a risk of 
injury and fire.

c)  When battery pack is not in use, keep 

it away from other metal objects, like 

paper clips, coins, keys, nails, screws 

or other small metal objects, that can 

make a connection from one terminal 

to another. 

Shorting the battery terminals 

together may cause burns or a fire.

d) Under abusive conditions, liquid may 

be ejected from the battery; avoid 

contact. If contact accidentally occurs, 

flush with water. If liquid contacts 

eyes, additionally seek medical help. 

Liquid ejected from the battery may cause 
irritation or burns.

6) SERVICE

a)  Have your power tool serviced by 

a qualified repair person using only 

identical replacement parts.

 This  will 

ensure that the safety of the power tool is 
maintained. 

CHAIN SAW SAFETY 

WARNINGS 

1.  Keep all parts of the body away from 

the saw chain when the chain saw is 

operating. Before you start the chain 

saw, make sure the saw chain is not 

contacting anything. 

A moment of 

inattention while operating chain saws may 
cause entanglement of your clothing or 
body with the saw chain.

2.  Always hold the chain saw with your 

right hand on the rear handle and 

your left hand on the front handle.

Holding the chain saw with a reversed hand 
configuration increases the risk of personal 
injury and should never be done.

3.  Hold  the power tool by insulated 

gripping surfaces only, because the 

saw chain may contact hidden wiring. 

Saw chains contacting a “live” wire may 
make exposed metal parts of the power tool 
“live” and could give the operator an electric 
shock.