WORX WG368E - Инструкция по эксплуатации - Страница 10

Cordless Chain Saw 

EN

10

GENERAL POWER TOOL 

SAFETY WARNINGS

WARNING:

Read all safety warnings 

and all instructions. Failure to follow the 

warnings and instructions may result in electric 
shock, fire and/or serious injury.

Save all warnings and instructions for 

future reference.

The term “power tool” in the warnings refers 
to your mains-operated (corded) power tool or 
battery-operated (cordless) power tool.

1)  WORK AREA SAFETY

a)  Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in 

explosive atmospheres, such as in the 

presence of flammable liquids, gases or 

dust.

 Power tools create sparks which may 

ignite the dust or fumes.

c)  Keep children and bystanders 

away while operating a power tool. 

Distractions can cause you to lose control.

2) ELECTRICAL SAFETY

a)  Power tool plugs must match the 

outlet. Never modify the plug in any 

way. Do not use any adapter plugs 

with earthed (grounded) power tools.

Unmodified plugs and matching outlets will 
reduce risk of electric shock.

b) Avoid body contact with earthed or 

grounded surfaces, such as pipes, 

radiators, ranges and refrigerators

. 

There is an increased risk of electric shock if 
your body is earthed or grounded.

c)  Do not expose power tools to rain or 

wet conditions

. Water entering a power 

tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the 

cord for carrying, pulling or unplugging 

the power tool. Keep cord away from 

heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the 
risk of electric shock.

e)  When operating a power tool outdoors, 

use an extension cord suitable for 

outdoor use.

 Use of a cord suitable for 

outdoor use reduces the risk of electric 
shock. 

f)  If operating a power tool in a damp 

location is unavoidable, use a residual 

current device (RCD) protected supply.

Use of an RCD reduces the risk of electric 
shock. 

3) PERSONAL SAFETY

a)  Stay alert, watch what you are 

doing and use common sense when 

operating a power tool. Do not use 

a power tool while you are tired or 

under the influence of drugs, alcohol or 

medication.

 A moment of inattention while 

operating power tools may result in serious 
personal injury. 

b) Use personal protective equipment. 

Always wear eye protection.

 Protective 

equipment such as dust mask, non-skid 
safety shoes, hard hat, or hearing protection 
used for appropriate conditions will reduce 
personal injuries. 

c)  Prevent unintentional starting. Ensure 

the switch is in the off-position before 

connecting to power source and/or 

battery pack, picking up or carrying the 

tool.

 Carrying power tools with your finger 

on the switch or energising power tools that 
have the switch on invites accidents. 

d) Remove any adjusting key or wrench 

before turning the power tool on.

 A 

wrench or a key left attached to a rotating 
part of the power tool may result in personal 
injury. 

e)  Do not overreach. Keep proper 

footing and balance at all times.

 This 

enables better control of the power tool in 
unexpected situations. 

f)  Dress properly. Do not wear loose 

clothing or jewellery. Keep your hair, 

clothing and gloves away from moving 

parts.

 Loose clothes, jewellery or long hair 

can be caught in moving parts.

g) If devices are provided for the 

connection of dust extraction and 

collection facilities, ensure these are 

connected and properly used.

 Use of 

dust collection can reduce dust-related 
hazards.