WORX WG303E - Инструкция по эксплуатации - Страница 12

Электропилы WORX WG303E - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 228
Загружаем инструкцию
background image

Chain saw 

En

13

12

13

12

protective clothing will reduce personal 
injury by flying debris or accidental 
contact with the saw chain. 

4. 

Do not operate a chain saw in a tree.

 

Operation of a chain saw while up in a tree 
may result in personal injury.

5. 

Always keep proper footing and 

operate the chain saw only when 

standing on fixed, secure and level 

surface.

 Slippery or unstable surfaces 

such as ladders may cause a loss of 
balance or control of the chain saw.

6. 

when cutting a limb that is under 

tension be alert for spring back.

 When 

the tension in the wood fibres is released 
the spring loaded limb may strike the 
operator and/or throw the chain saw out 
of control.

7. 

use extreme caution when cutting 

brush and saplings. 

The slender 

material may catch the saw chain and 
be whipped toward you or pull you off 
balance.

8. 

Carry the chain saw by the front 

handle with the chain saw switched 

off and away from your body. when 

transporting or storing the chain saw 

always fit the guide bar cover.

 Proper 

handling of the chain saw will reduce the 
likelihood of accidental contact with the 
moving saw chain.

9. 

Follow instructions for lubricating, 

chain tensioning and changing 

accessories. 

Improperly tensioned 

or lubricated chain may either break or 
increase the chance for kickback.

10.

Keep handles dry, clean, and free 

from oil and grease. 

Greasy, oily 

handles are slippery causing loss of 
control.

11. 

Cut wood only. Do not use chain 

saw for purposes not intended. For 

example: do not use chain saw for 

cutting plastic, masonry or non-wood 

building materials.

 Use of the chain saw 

for operations different than intended 
could result in a hazardous situation.

12.Using of a residual cuttent device with 

a tripping current of 30 mA or less is 
recommendated.

CAuSES AND OPERATOR PREVENTION 

OF KICKBACK:

Kickback may occur when the nose or tip of 
the guide bar touches an object, or when the 
wood closes in and pinches the saw chain in 
the cut.
Tip contact in some cases may cause a 
sudden reverse reaction, kicking the guide bar 
up and back towards the operator.
Pinching the saw chain along the top of the 
guide bar may push the guide bar rapidly back 
towards the operator.
Either of these reactions may cause you to 
lose control of the saw which could result in 
serious personal injury. Do not rely exclusively 
upon the safety devices built into your saw. 
As a chain saw user, you should take several 
steps to keep your cutting jobs free from 
accident or injury.
Kickback is the result of tool misuse and/or 
incorrect operating procedures or conditions 
and can be avoided by taking proper 
precautions as given below:

Maintain a firm grip, with thumbs 

and fingers encircling the chain saw 

handles, with both hands on the saw 

and position your body and arm to 

allow you to resist kickback forces.

 

Kickback forces can be controlled by the 

operator, if proper precautions are taken. 

Do not let go of the chain saw.

Do not overreach and do not cut 

above shoulder height.

 This helps 

prevent unintended tip contact and 

enables better control of the chain saw in 

unexpected situations.

Only use replacement bars and 

chains specified by the manufacturer.

 

Incorrect replacement bars and chains 

may cause chain breakage and/or kickback.

Follow the manufacturer’s sharpening 

and maintenance instructions for the 

saw chain. 

Decreasing the depth gauge 

height can lead to increased kickback.

ATTENTION:

 Through poor conditions 

of the electrical MAINS, shortly 

voltage drops can appear when starting 
the EQUIPMENT. This can influence other 
equipment (Eg. Blinking of a lamp). If the 
MAINS-IMPEDANCE Zsysmax = 0.22+0.13j, 
such disturbances are not expected. (In case 
of need, you may contact your local supply 
authority for further information).

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к WORX WG303E?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"