WORX WG303E - Инструкция по эксплуатации - Страница 11

11

10

Chain saw 

En

11

10

unexpected situations.

6) 

Dress properly. Do not wear loose 

clothing or jewellery. Keep your hair 

and clothing away from moving parts.

Loose clothes, jewellery or long hair can 
be caught in moving parts.

7) 

If devices are provided for the 

connection of dust extraction and 

collection facilities, ensure these are 

connected and properly used.

 Use of 

dust collection can reduce dust-related 
hazards.

GENERAL POwER TOOL SAFETy 

wARNINGS -POwER TOOL uSE 

AND CARE

1) 

Do not force the power tool. use 

the correct power tool for your 

application. 

The correct power tool will 

do the job better and safer at the rate for 
which it was designed.

2) 

Do not use the power tool if the 

switch does not turn it on and off. 

Any power tool that cannot be controlled 
with the switch is dangerous and must be 
repaired.

3)

  Disconnect the plug from the power 

source and/or the battery pack from 

the power tool before making any 

adjustments, changing accessories, 

or storing power tools.

 Such preventive 

safety measures reduce the risk of starting 
the power tool accidentally.

4) 

Store idle power tools out of the 

reach of children and do not allow 

persons unfamiliar with the power 

tool or these instructions to operate 

the power tool.

  Power tools are dangerous in the hands of 

untrained users.

5) 

Maintain power tools. Check for 

misalignment or binding of moving 

parts, breakage of parts and any 

other condition that may affect the 

power tool’s operation. If damaged, 

have the power tool repaired before 

use.

 Many accidents are caused by poorly 

maintained power tools.

6) 

Keep cutting tools sharp and clean. 

Properly maintained cutting tools with 

sharp cutting edges are less likely to bind 
and are easier to control.

7) 

use the power tool, accessories 

and tool bits etc. in accordance 

with these instructions, taking into 

account the working conditions and 

the work to be performed.

 Use of the 

power tool for operations different from 
those intended could result in a hazardous 
situation.

8) 

Keep handles dry, clean and free from 

oil and grease.

 Slippery handles do not 

allow for safe handling and control of the 
tool in unexpected situations.

GENERAL POwER TOOL SAFETy 

wARNINGS -SERVICE

a) 

Have your power tool serviced by 

a qualified repair person using only 

identical replacement parts. 

This will 

ensure that the safety of the power tool is 
maintained.

b) 

If the replacement of the supply cord 

is necessary, this has to be done 

by the manufacturer or his agent in 

order to avoid a safety hazard. 

ADDITIOnAL SAfETy 

POInTS fOR yOUR 

ELECTRIC CHAIn SAW

1. 

Keep all parts of the body away from 

the saw chain when the chain saw 

is operating. Before you start the 

chain saw, make sure the saw chain 

is not contacting anything. 

A moment 

of inattention while operating chain saws 
may cause entanglement of your clothing 
or body with the saw chain.

2. 

Always hold the chain saw with your 

right hand on the rear handle and 

your left hand on the front handle.

Holding the chain saw with a reversed 
hand configuration increases the risk of 
personal injury and should never be done.

3. 

wear safety glasses and hearing 

protection. Further protective 

equipment for head, hands, legs 

and feet is recommended. 

Adequate