WORX WG303E - Инструкция по эксплуатации - Страница 10

Электропилы WORX WG303E - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 228
Загружаем инструкцию
background image

Chain saw 

En

11

10

11

10

GEnERAL POWER TOOL 

SAfETy WARnInGS

wARNING Read all safety 

warnings and all instructions.

 

Failure to follow the warnings and 
instructions may result in electric shock, fire 
and/or serious injury.

wARNING Read all safety 

warnings designated by the  

symbol and all instructions.

Save all warnings and instructions for future 
reference.
The term “power tool” in the warnings refers 
to your mains-operated (corded) power tool 
or battery-operated (cordless) power tool.

GENERAL POwER TOOL SAFETy 

wARNINGS - wORK AREA SAFETy

1) 

Keep work area clean and well lit.

 

Cluttered or dark areas invite accidents.

2) 

Do not operate power tools in 

explosive atmospheres, such as in 

the presence of flammable liquids, 

gases or dust

. Power tools create sparks 

which may ignite the dust or fumes.

3) 

Keep children and bystanders 

away while operating a power tool. 

Distractions can cause you to lose control.

GENERAL POwER TOOL SAFETy 

wARNINGS - ELECTRICAL SAFETy

1) 

Power tool plugs must match the 

outlet. Never modify the plug in any 

way. Do not use any adapter plugs 

with earthed (grounded) power tools.

 

Unmodified plugs and matching outlets 
will reduce risk of electric shock.

2) 

Avoid body contact with earthed or 

grounded surfaces, such as pipes, 

radiators, ranges and refrigerators.

 

There is an increased risk of electric shock 
if your body is earthed or grounded.

3) 

Do not expose power tools to rain or 

wet conditions. 

Water entering a power 

tool will increase the risk of electric shock.

4) 

Do not abuse the cord. Never use 

the cord for carrying, pulling or 

unplugging the power tool. Keep 

cord away from heat, oil, sharp 

edges or moving parts.

  Damaged or entangled cords increase the 

risk of electric shock.

5) 

when operating a power tool 

outdoors, use an extension cord 

suitable for outdoor use.

 Use of a cord 

suitable for outdoor use reduces the risk 
of electric shock.

6) 

If operating a power tool in a 

damp location is unavoidable, use 

a residual current device (RCD) 

protected supply.

 Use of an RCD 

reduces the risk of electric shock.

  NOTE The term “residual current device 

(RCD)” may be replaced by the term 
“ground fault circuit interrupter (GFCI)” or 
“earth leakage circuit breaker (ELCB)”.

GENERAL POwER TOOL SAFETy 

wARNINGS -PERSONAL SAFETy

1) 

Stay alert, watch what you are 

doing and use common sense when 

operating a power tool. Do not use 

a power tool while you are tired or 

under the influence of drugs, alcohol 

or medication.

 A moment of inattention 

while operating power tools may result in 
serious personal injury. 

2) 

use personal protective equipment. 

Always wear eye protection.

 

Protective equipment such as dust mask, 
non-skid safety shoes, hard hat, or 
hearing protection used for appropriate 
conditions will reduce personal injuries.

3) 

Prevent unintentional starting. 

Ensure the switch is in the off-

position before connecting to power 

source and/or battery pack, picking 

up or carrying the tool.

  Carrying power tools with your finger on 

the switch or energising power tools that 
have the switch on invites accidents.

4) 

Remove any adjusting key or wrench 

before turning the power tool on.

 A 

wrench or a key left attached to a rotating 
part of the power tool may result in 
personal injury.

5) 

Do not overreach. Keep proper 

footing and balance at all times. 

This 

enables better control of the power tool in 

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к WORX WG303E?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"