Ryobi RY36CSX40B-0, MAX POWER 36В (5133004898) - Инструкция по эксплуатации - Страница 4

■

Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges are 
less likely to bind and are easier to control.

■

Use the power tool, accessories and tool bits etc. 
in accordance with these instructions, taking into 
account the working conditions and the work to 
be performed. 

Use of the power tool for operations 

different from those intended could result in a 
hazardous situation.

■

Keep handles and grasping surfaces dry, clean 
and free from oil and grease.

 Slippery handles and 

grasping surfaces do not allow for safe handling and 
control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

■

Recharge only with the charger specified by the 
manufacturer.

 A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 
another battery pack.

■

Use power tools only with specifically designated 
battery packs.

 Use of any other battery packs may 

create a risk of injury and fire.

■

When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, 
nails, screws or other small metal objects, that can 
make a connection from one terminal to another.

Shorting the battery terminals together may cause 
burns or a fire.

■

Under abusive conditions, liquid may be ejected 
from the battery; avoid contact. If contact 
accidentally occurs, flush with water. If liquid 
contacts eyes, additionally seek medical help.

 Liquid 

ejected from the battery may cause irritation or burns.

■

Do not use a battery pack or tool that is damaged or 
modified.

 Damaged or modified batteries may exhibit 

unpredictable behaviour resulting in fire, explosion or 
risk of injury.

■

Do not expose a battery pack or tool to fire 
or excessive temperature.

 Exposure to fire or 

temperature above 130°C may cause explosion.

■

Follow all charging instructions and do not charge 
the battery pack or tool outside the temperature 
range specified in the instructions.

 Charging 

improperly or at temperatures outside the specified 
range may damage the battery and increase the risk 
of fire.

SERVICE

■

Have your power tool serviced by a qualified repair 
person using only identical replacement parts.

This will ensure that the safety of the power tool is 
maintained.

■

Never service damaged battery packs.

 Service 

of battery packs should only be performed by the 
manufacturer or authorized service providers.

GENERAL CHAINSAW SAFETY WARNINGS

■

Keep all parts of the body away from the saw chain 
when the chainsaw is operating. Before you start 
the chainsaw, make sure the saw chain is not 
contacting anything.

 A moment of inattention while 

operating chainsaws may cause entanglement of your 
clothing or body with the saw chain.

■

Always hold the chainsaw with your right hand 
on the rear handle and your left hand on the front 
handle.

 Holding the chainsaw with a reversed hand 

configuration increases the risk of personal injury and 
should never be done.

■

Hold the chainsaw by insulated gripping surfaces 
only, because the saw chain may contact hidden 
wiring.

 Saw chains contacting a “live” wire may make 

exposed metal parts of the chainsaw “live” and could 
give the operator an electric shock.

■

Wear eye protection. Further protective equipment 
for hearing, head, hands, legs and feet is 
recommended. 

Adequate protective equipment will 

reduce personal injury by flying debris or accidental 
contact with the saw chain.

■

Do not operate a chainsaw in a tree, on a ladder, 
from a rooftop, or any unstable support.

 Operation 

of a chainsaw in this manner could result in serious 
personal injury.

■

Always keep proper footing and operate the 
chainsaw only when standing on fixed, secure and 
level surface. 

Slippery or unstable surfaces may cause 

a loss of balance or control of the chainsaw.

■

When cutting a limb that is under tension, be alert 
for spring back.

 When the tension in the wood fibres is 

released, the spring loaded limb may strike the operator 
and/or throw the chainsaw out of control.

■

Use extreme caution when cutting brush and 
saplings.

 The slender material may catch the saw 

chain and be whipped toward you or pull you off 
balance.

■

Carry the chainsaw by the front handle with the 
chainsaw switched off and away from your body. 
When transporting or storing the chainsaw, always 
fit the guide bar cover. 

Proper handling of the 

chainsaw will reduce the likelihood of accidental contact 
with the moving saw chain.

■

Follow instructions for lubricating, chain tensioning 
and changing the bar and chain.

 Improperly tensioned 

or lubricated chain may either break or increase the 
chance for kickback.

■

Cut wood only.

Do not use chainsaw for purposes 

not intended. For example: do not use chainsaw 
for cutting metal, plastic, masonry or non-wood 
building materials. 

Use of the chainsaw for operations 

different than intended could result in a hazardous 
situation.

■

Do not attempt to fell a tree until you have an 
understanding of the risks and how to avoid them.

Serious injury could occur to the operator or bystanders 
while felling a tree.

■

Follow all instructions when clearing jammed 
material, storing or servicing the chainsaw.

 Make 

sure the switch is off and the battery pack is removed. 
Unexpected actuation of the chainsaw while clearing 
jammed material or servicing may result in serious 
personal injury.

CAUSES AND OPERATOR PREVENTION OF 
KICKBACK:

Kickback may occur when the nose or tip of the guide bar 
touches an object, or when the wood closes in and pinches 
the saw chain in the cut.

4

| English