Ryobi RY36CSX40B-0, MAX POWER 36В (5133004898) - Инструкция по эксплуатации - Страница 3

Safety, performance, and dependability have been given 
top priority in the design of your cordless chainsaw.

INTENDED USE

The cordless chainsaw is intended for outdoor use only. For 
safety reasons, the product must be adequately controlled 
by using a two-handed operation at all times.
The product is designed for cutting branches, trunks, logs, 
and beams of a diameter determined by the cutting length 
of the guide bar. It is designed to cut wood only. 
The product is to be used in domestic applications only by 
adults who have received adequate training on the hazards 
and preventative measures to be taken while using the 
product. It should not be used for professional tree services.
Do not use the product for any other purpose.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings, instructions, 

illustrations and specifications provided with this 
power tool. 

Failure to follow all instructions listed below 

may result in electric shock, 

fi

 re, and/or serious injury. 

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) 
power tool.

WORK AREA  SAFETY

■

Keep work area clean and well lit. 

Cluttered or dark 

areas invite accidents.

■

Do not operate power tools in explosive 
atmospheres, such as in the presence of flammable 
liquids, gases or dust. 

Power tools create sparks 

which may ignite the dust or fumes.

■

Keep children and bystanders away while operating 
a power tool. 

Distractions can cause you to lose control.

ELECTRICAL SAFETY 

■

Power tool plugs must match the outlet. Never 
modify the plug in any way. Do not use any adapter 
plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk 
of electric shock. 

■

Avoid body contact with earthed or grounded 
surfaces, such as pipes, radiators, ranges and 
refrigerators.

 There is an increased risk of electric 

shock if your body is earthed or grounded.

■

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of 
electric shock.

■

Do not abuse the cord. Never use the cord for 
carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges or 
moving parts.

 Damaged or entangled cords increase 

the risk of electric shock.

■

When operating a power tool outdoors, use an 
extension cord suitable for outdoor use.

 Use of a 

cord suitable for outdoor use reduces the risk of electric 
shock.

■

If operating a power tool in a damp location is 
unavoidable, use a residual current device (RCD) 
protected supply.

 Use of an RCD reduces the risk of 

electric shock.

PERSONAL SAFETY

■

Stay alert, watch what you are doing and use 
common sense when operating a power tool. Do 
not use a power tool while you are tired or under the 
influence of drugs, alcohol or medication.

 A moment 

of inattention while operating power tools may result in 
serious personal injury.

■

Use personal protective equipment. Always wear 
eye protection.

 Protective equipment such as a dust 

mask, non-skid safety shoes, hard hat or hearing 
protection used for appropriate conditions will reduce 
personal injuries.

■

Prevent unintentional starting. Ensure the switch 
is in the off-position before connecting to power 
source and/or battery pack, picking up or carrying 
the tool.

 Carrying power tools with your finger on the 

switch or energising power tools that have the switch 
on invites accidents.

■

Remove any adjusting key or wrench before turning 
the power tool on.

 A wrench or a key left attached to 

a rotating part of the power tool may result in personal 
injury.

■

Do not overreach. Keep proper footing and balance 
at all times.

 This enables better control of the power 

tool in unexpected situations.

■

Dress properly. Do not wear loose clothing or 
jewellery. Keep your hair and clothing away from 
moving parts. 

Loose clothes, jewellery or long hair can 

be caught in moving parts.

■

If devices are provided for the connection of dust 
extraction and collection facilities, ensure these are 
connected and properly used.

 Use of dust collection 

can reduce dust-related hazards.

■

Do not let familiarity gained from frequent use of 
tools allow you to become complacent and ignore 
tool safety principles.

 A careless action can cause 

severe injury within a fraction of a second.

POWER TOOL USE AND CARE

■

Do not force the power tool. Use the correct power 
tool for your application.

 The correct power tool will 

do the job better and safer at the rate for which it was 
designed. 

■

Do not use the power tool if the switch does not turn 
it on and off.

 Any power tool that cannot be controlled 

with switch is dangerous and must be repaired.

■

Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from 
the power tool before making any adjustments, 
changing accessories, or storing power tools.

 Such 

preventive safety measures reduce the risk of starting 
the power tool accidentally.

■

Store idle power tools out of the reach of children 
and do not allow persons unfamiliar with the power 
tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained 
users.

■

Maintain power tools and accessories. Check for 
misalignment or binding of moving parts, breakage 
of parts and any other condition that may affect the 
power tool’s operation. If damaged, have the power 
tool repaired before use.

 Many accidents are caused 

by poorly maintained power tools.

3

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR