Makita EA3503S 40B - Инструкция по эксплуатации - Страница 8

8

20

21

22

23

NOTE

Individuals with poor circulation who are exposed to excessive 
vibration may experience injury to blood vessels or the nervous 
system.

Vibration may cause the following symptoms to occur in the 

Þ

 ngers, hands or wrists: ”Falling asleep” (numbness), tingling, 

pain, stabbing sensation, alteration of skin colour or of the skin. 

If any of these symptoms occur, see a physician!

To reduce the risk of vibration white 

Þ

 nger, keep your 

hands warm, wear gloves, and make sure the saw chain 
is sharp.

SERVICE

Transport and storage

- 

When changing your location during work switch off the 
chain saw and actuate the chain brake in order to prevent 
an inadvertent start of the chain.

- 

Never carry or transport the chain saw with the chain run-
ning.

When the saw is hot, do not cover it (with a tarp, blanket, 
newspaper or the like).

Let the saw cool down before putting it in a storage case 
or vehicle. Saws with catalytic converter take longer to 
cool down!

- 

When transporting the chain saw over long distances the guide 
bar protection cover (delivered with the chain saw) must be 
applied. 

-  Carry the chain saw with the tubular handle. The guide bar 

points backwards (20). Avoid coming in contact with the muf

ß

 er 

(danger of burns).

-  Ensure safe positioning of the chain saw during car trans-

portation to avoid fuel or chain oil leakage.

- 

Store the chain saw safely in a dry place. It must not be stored 
outdoors. Keep the chain saw away from children.

- 

Before storing the chain saw over a long period of time or  ship-
ping it the fuel and oil tanks must be completely emptied.

Maintenance

- 

Before performing maintenance work switch off the  chain 
saw 

(21)

 and pull out the plug cap.

-  Before starting work always check the operating safety of the 

chain saw, in particular the function of the chain brake. Make 
sure that the chain is always sharpened and tightened cor-
rectly (22).

- 

Operate the chain saw only at a low noise and emission level. 
For this ensure the carburetor is adjusted correctly.

-  Regularly clean the chain saw.

-  Regularly check the tank cap for tightness.

Observe the accident prevention instructions issued by 
trade associations and insurance companies. Do not 
perform any modi

Þ

 cations on the chain saw. You will put 

your safety at risk.

Perform only the maintenance and repair works described in 
the instruction manual. All other work must be carried out by 
MAKITA Service.

Use only original MAKITA spare parts and accessories.

Using spare parts other than original MAKITA parts or ac-
cesories and guide bar/chain combinations or lengths which 
are not approved bring a high risk of accidents. We cannot 
accept any responsibility for accidents and damage resulting 
from using sawing devices or accesories which have not been 
approved.

First aid

For the event of a possible accident, please make sure that a 

Þ

  rst aid kit is always immediately available close by. Immediately 

replace any items used from the 

Þ

 rst aid box.

When calling for help, give the following information:

- Place of the accident 

- What happened

- Number of injured people

- Kind of injuries

 - 

Your 

name!