Makita EA3503S 40B - Инструкция по эксплуатации - Страница 29

29

3

1

2

4

5

7

5

4

*

3

4

5

6

CAUTION: To prevent eye injury, always wear eye protection 
when cleaning the 

Þ

 lter with compressed air!

Do not use fuel to clean the air 

Þ

 lter

.

Insert the universal wrench vertically through the slotted plug 
(*).

Loosen the scew (

1

) counter-clockwise and remove the hood 

(

2

).

Push up the combination switch (

3

) (Choke position) to prevent 

dirt particles from falling into the carburetor.

Pull the air 

Þ

  lter cover tab (

4

) slightly in the direction of the arrow, 

and remove the air 

Þ

 lter cover.

Remove the air 

Þ

 lter (

5

).

IMPORTANT:

 Cover the intake opening with a clean cloth to 

prevent dirt particles from getting into the carburetor.

If the 

Þ

 lter is very dirty, clean it in lukewarm water with dish-

washing detergent.

Let the air 

Þ

 lter 

dry completely

.

If the 

Þ

 lter is very dirty, clean it frequently (several times a day), 

because only a clean air 

Þ

 lter provides full engine power.

CAUTION: 

Replace damaged air 

Þ

 lters immediately.

Pieces of cloth or large dirt particles can destroy the en-
gine!

Insert the air 

Þ

 lter (

5

).

Put on the air 

Þ

 lter cover.

Note:

 The air 

Þ

 lter cover tab (

4

) will engage automatically if the 

air 

Þ

 lter cover is properly positioned.

Push down the combination switch (

3

) and press the throttle 

(

6

) all the way down one time in order to deactivate the throt-

tle lock.

Put on the hood (

2

). When doing so make sure that the lower 

pins (

7

) on both sides of the  hood engage properly (when cor-

rectly assembled, the pins should not be visible).

Tighten screw (

1

) clockwise.

Cleaning the air 

Þ

 lter