Электропилы AL-KO 441479 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Operating and maintenance instructions ; Guarantee
ENGLISH
11
.2 Shutdown and storage
It is best to store the unit in a dry, secure location.
Open flames or similar must not be nearby.
Prevent unauthorised use – particularly by
children.
Before cleaning always switch OFF the motor and
pull the mains supply plug from its socket.
Never hose down this power tool.
x
Clean cuttings from the cutting area with a
hand-held brush.
x
Only use a dry or slightly damp cloth to clean
the entire machine. Never use solvents or
abrasive cleaning agents. Before connecting the
equipment to the mains supply, the motor
casing and its interior must not be damp.
x
Clean and maintain the cutter.
We recommend: clean with "SOLO Universal-
Reiniger (Cleaner)" and
treat with "SOLO maintenance and care oil"
Never use grease.
The blade guard (11) can be mounted on to a
secure wall to provide a safe place to store the
hedge trimmer.
7
. Guarantee
The manufacturer guarantees trouble-free quality
and will cover the cost of replacing parts which are
found to be faulty in material or workmanship within
the prescribed guarantee period after the date of
purchase. Please note that specific guarantee
conditions may vary from country to country. If in
doubt, ask your equipment vendor. He is
responsible for guarantee matters.
We hope you will understand that we cannot be
liable for damage resulting from the following
causes:
x
Non-compliance with the operating
instructions.
x
Neglecting essential maintenance and repair
work.
x
Wear in normal use.
x
Using non-authorised tools.
x
Use of force, incorrect treatment, misuse and
accidents.
x
Damage from excessive heat due to dirt build-
up around the cooling fan housing.
x
Attempted adjustments and repairs by
unqualified persons.
x
Use of unsuitable spare parts or third party
parts, if these are the cause of the defect.
x
Damage caused by using the product in the
hire or rental industry.
Normal cleaning, adjustments or maintenance work
fall outside the guarantee provisions.
A service centre authorised by the manufacturer
must carry out all guarantee work.
Fig. 14
