AL-KO 441479 - Инструкция по эксплуатации - Страница 15

Safety regulations 

ENGLISH 

3

3) Personal 

safety 

a) 

Stay alert, watch what you are doing and use common sense when operating a power tool. 
Do not use a power tool while you are tired or under the influence of drugs, alcohol or 
medication

. A moment of inattention while operating power tools may result in serious personal 

injury. 

b) 

Use safety equipment. Always wear eye protection

. Safety equipment such as dust mask, non-

skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce 
personal injuries. 

c) 

Avoid accidental starting. Ensure the switch is in the off-position before plugging in

. 

Carrying power tools with your finger on the switch or plugging in power tools that have the switch 
on invites accidents. 

d) 

Remove any adjusting key or wrench before turning the power tool on

. A wrench or a key left 

attached to a rotating part of the power tool may result in personal injury. 

e) 

Do not overreach. Keep proper footing and balance at all times

. This enables better control of 

the power tool in unexpected situations. 

f) 

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and 
gloves away from moving parts

. Loose clothes, jewellery or long hair can be caught in moving 

parts. 

4)  Power tool use and care 

a) 

Do not force the power tool. Use the correct power tool for your application

. The correct 

power tool will do the job better and safer at the rate for which it was designed. 

b) 

Do not use the power tool if the switch does not turn it on and off

. Any power tool that cannot 

be controlled with the switch is dangerous and must be repaired. 

c) 

Disconnect the plug from the power source before making any adjustments, changing 
accessories, or storing power tools

. Such preventive safety measures reduce the risk of starting 

the power tool accidentally. 

d) 

Store idle power tools out of the reach of children and do not allow persons unfamiliar with 
the power tool or these instructions to operate the power tool

. Power tools are dangerous in 

the hands of untrained users. 

e) 

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts 
and any other condition that may affect the power tools operation. If damaged, have the 
power tool repaired before use

. Many accidents are caused by poorly maintained power tools. 

f) 

Keep cutting tools sharp and clean

. Properly maintained cutting tools with sharp cutting edges 

are less likely to bind and are easier to control. 

g) 

Use the power tool, accessories and tool bits etc. in accordance with these instructions and 
in the manner intended for the particular type of power tool, taking into account the working 
conditions and the work to be performed

. Use of the power tool for operations different from 

those intended could result in a hazardous situation. 

5) Service 

a) 

Have your power tool serviced by a qualified repair person using only identical replacement 
parts

. This will ensure that the safety of the power tool is maintained.