MONSHER MOE 6026 - Инструкция по эксплуатации - Страница 41

41

41

English

;

The appliance should be checked after its package is opened. In case of a damage, 
it should not be installed.

;

The components may be sharp, wear protective gloves during installation

;

The appliance should be installed in accordance with the rules related to the elec-
tricity and gas mentioned in the local standards.

;

The dimensions mentioned in the image, are in mm.

;

Kitchen cabinets should be on the same level with the appliance and fixed.

;

Do not mount the appliance in a decoration or closed furniture. It is dangerous due 
to overheating.

;

The furniture, where the installation would be applied, (min. 100

0

C) should be made 

of durable material.

;

It is not recommended to install the appliance close to the cooler. The performance 
of these appliances might be impacted negatively due to the heat.

ELECTRICITY CONNECTION AND SAFETY

 WARNING.

 Power grid should be disconnected during installation. Do not turn it 

on until the installation ends.

;

The appliance should be installed correctly by the authorized service technician in 
accordance with the specified instructions.

;

Do not pass the connection cables over the hot surface. When the cables melt, they 
may cause a short circuit or a fire.

;

If the cables are damaged,they should be replaced by an electrician.

;

They should be plugged into a (grounded) outlet in the grounding system in accor-
dance with the rules.

If there is not a suitable outlet, call the electrician and have your electrical wiring 

checked.

;

Make sure that your plug is grounded.

;

The company is not responsible for the damages caused by the ungrounded outlets 
where the appliance is plugged in.

;

If the product has a cable and a plug; an electrical connection is established by plug-
ging the appliance in a grounded outlet.

;

If the product has a cable but not a plug; coding should be performed by an expert 
suitably.