Redmond RK-M173S-E SkyKettle - Инструкция по эксплуатации - Страница 10

10

4.  To interrupt the water heating process repress   button and remove the kettle 

from the base.

If the temperature in the kettle is higher than the desired heating temperature the 

heating process won‘t be enabled.

To switch to the „Heated boiling“ mode during heating process press   button.

Heated boiling 

This  mode  allows  keeping  the  selected  temperature  (40-90°С)  for  up  to  2  hours. 

If the temperature will drop lower than the selected value, the heating element will 

be automatically enabled.

1.  Press 

. The heating process will start, 100°С indicator will appear on the 

top of the display.

2.  Press   button during water heating. The button indicator will start blinking. 

The  heating  temperature  value  will  be  flashing  on  the  top  of  the  display. 

The current temperature value of water is displayed at the bottom of display.

3. 

Use “+” and “–” buttons to adjust the temperature value if necessary (in 5°С 

interval). It can also be adjusted while the kettle is in the heating mode. In a 

few seconds after the end of adjustment the temperature value on the top of 

display will switch to 100°С.

4.  After water comes to a boil an audible signal will be heard and appliance will 

switch to the heating mode. The temperature value indicator and   on the 

display will be lit up solid in this mode, and also   indicator will be lit.

5.  The appliance will automatically switch to standby mode in 2 hours.

6.  To interrupt the boiling and switch to the heating repress   button. To dis-

able the heating after boiling repress   button. To interrupt the operation 

remove the kettle from the base.

Safety system

• 

The kettle is equipped with the system of auto shut-off upon boiling or remov-

ing from the base. 

• 

In case of lack of water in the kettle or water shortage the automatic overheat 

protection will be activated. An audible signal will be heard and the appliance 

will be automatically disconnected. 

 and 

  indicators will be displayed. 

To enable indication remove the kettle from the base. Wait till it completely 

cools down. Then the appliance will be ready for operation.

Control panel lock

To provide extra safety the appliance is equipped with control panel lock function. It 

prevents accidental pressing the buttons. To enable/disable the lock in the standby press 

“+” button, and, holding it, press   button. An audible signal will be heard. If any button 

is pressed in the lock mode, “+” and   button indicators will be lit on the control panel.

Non-volatile memory

The kettle is equipped with a non-volatile memory unit. In case temporary power cut occurs 

during water heating or boiling all user‘s settings are saved to the memory of the appliance. 

When power supply is resumed the kettle will automatically continue its operation.

I I I.  C L E A N I N G  A N D  M A I N T E N A N C E 

Unplug the kettle and allow it to cool before cleaning. 

DO NOT use a sponge or tissue with hard or abrasive surface or abrasive pastes. Do 

not use any chemically aggressive substances or any other agents which are not 

recommended for cleaning items that come into contact with food.
ATTENTION! Before repeated usage make sure that the electrical contacts are kept dry! 

Base and body cleaning 

Clean the kettle body and base with a soft cloth. Dry the kettle before operation. 

ATTENTION! Never immerse the kettle, the base, the power cord or the socket in 

water: the electrical contacts should not contact with water. 

Descaling 

During operation, depending on the composition of usable water, oxide spots and scale 

can appear on the heating element and inner walls of the appliance. To remove them:

1.  Pour water into the kettle ¾ from maximum capacity and bring it to a boil.

2.  After the kettle turns off, add 8% acetic acid solution to the maximum level 

on the inner surface of the body. 

3.  Leave this solution inside the kettle for several hours. 

4.  Empty the kettle and rinse properly.

5.  Fill the kettle with clean water up to the maximum level on the inner surface 

of the body and bring it to a boil. 

6.  Empty the kettle and rinse it again. If scale still remains, repeat the procedure 

mentioned above. 

You can also use special means for descaling. Follow the manufacturer’s instructions 

in this case.

To clean removable scale filter 

1. 

Open the lid. Remove the filter pulling it upward.