JBL Control X Wireless - Инструкция по эксплуатации - Страница 4

4

© 2015 HARMAN International Industries, Incorporated. All rights reserved.
JBL and CMMD are trademarks of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.  

Bluetooth

®

 is a registered trademark of Bluetooth SIG, Inc. 

Features, specifications and appearance are subject to change without notice.

HARMAN International Industries, Inc. 

8500 Balboa Boulevard, Northridge, CA 91329 USA 

    www.jbl.com

TR01319_A

2. Press the association button on the primary speaker. An audible 

confirmation will be played to indicate that the speaker successfully 

entered association mode. The front LED will blink blue if already 

paired with a Bluetooth device, otherwise it will blink white.

3. Wait until association process finishes. The process is complete as 

soon as the front LED on each speaker stops blinking.

Note:

 in case the association needs to be redone for speaker replace-

ment or configuration change, the current association set up needs to 

be reset. Press and hold the FWD and REV buttons on the top of the 

primary speaker for more than 3 seconds.
It is also possible to associate a second pair of JBL control X wireless 

speaker set to an existing pair to extend the system coverage. If you 

want to have a set of 4 speakers connected.
1. With all four primary and secondary speaker(s) powered on AC or 

Battery power

2. Use a paper clip to press the association button on the back of 

the second set primary speaker with the back control mode switch 

set to secondary “S”. The front LED will flash white indicating 

Association mode is active.

3. Press the association button on the primary speaker of the first 

master set. An audible confirmation will be played to indicate that 

the speaker successfully entered association mode. The front LED 

will blink blue if already paired with a Bluetooth device, otherwise it 

will blink white.

4. Wait until association process finishes. The process is complete as 

soon as the front LED on each speaker stops blinking.

5. Use a paper clip to press the association button on the back of 

the second set secondary speaker. The front LED will flash White 

indicating Association mode is active.

6. Press the association button on the secondary speaker of the first 

master set. An audible confirmation will be played to indicate that 

the speaker successfully entered association mode. The front LED 

will blink blue if already paired with a Bluetooth device, otherwise it 

will blink white.

7. Wait until association process finishes. The process is complete as 

soon as the front LED on each speaker stops blinking.

Note:

 in case the association needs to be redone for speaker 

replacement or configuration change, the current association set up 

needs to be reset. Press and hold the FWD and REV buttons on the 

top of the primary speaker for more than 3 seconds.

MAINTENANCE AND SERVICE

The speaker enclosures may be cleaned using a soft cloth to remove 

fingerprints or to wipe off dust.
All wiring connections should be inspected and cleaned or remade 

periodically. The frequency of maintenance depends on the metals 

involved in the connections, atmospheric conditions and other factors, 

but once per year is the minimum. In the event that your system ever 

needs service, contact your local JBL dealer or distributor, or visit 

www.jbl.com for a service center near you.

BATTERY DISPOSAL

Rechargeable batteries (i.e., nickel cadmium, nickel metalhydride, 

lithium and lithium-ion) are considered hazardous household materials 

and may pose an unnecessary health and safety risk.
In the European Union and other locations, it is illegal to dispose of any 

battery with household trash. All batteries must be disposed of in an 

environmentally sound manner. Contact your local waste management 

officials for information regarding the environmentally sound collection, 

recycling and disposal of used batteries.

SPECIFICATIONS

Low Frequency Transducer: 

5.25" (133mm) polypropylene  

graphite-filled cone

High Frequency Transducer: 

1” (25mm) CMMD

®

 Lite dome / 

High Definition Imaging Waveguide

Rated Power: 

30W per channel RMS (AC mode)

Frequency Response: 

62Hz - 20kHz (-6db)

Sensitivity:

(2.83V@1m) 87dB

Signal-to-noise ratio: 

>75 dB

Power supply: 

AC 100-240 VAC, 50-60Hz

Battery Type:

Lithium-ion Polymer (7.4V, 2600mAh)

Battery Charge Time: 

2.4 hours @ 0.5C

Playback Time: 

Up to 4 hours (varies by volume level 

and audio content)

Bluetooth

®

 2.1 with AVRCP 

profile v1.5
Bluetooth

®

 Transmitter Power:  0-4 dBm

Bluetooth

®

 Transmitter  

Frequency Range: 

2.402 – 2.480 GHz

Bluetooth

®

 Transmission Range:  Up to 10m (from source)

Speaker Range: 

Up to 30m (between primary and  

secondary speakers)

Dimensions: 

9-1/4” x 6-1/2” x 6-1/4”  

(235mm x 165mm x 159mm)

Weight: 

6.5 lbs (2.95 kg)

Finishes: 

Graphite / White / Red

AC IN

AUX-IN

L/R/L+R

P

S

MODE WALL/OTHER