Bosch AVR 1100 - Инструкция по эксплуатации - Страница 18

18

 | English 

F 016 L70 481 | (10.10.08)

Bosch Power Tools

f

Avoid operating the machine in wet grass, 
where feasible or take additional precautions 
to avoid slipping.

f

Raking/Verticutting on banks can be danger-
ous.

f

Do not rake/verticut excessively steep 
slopes.

– Always be sure of your footing on slopes or 

wet grass.

– Rake/Verticut across the face of slopes –  

never up and down.

– Exercise extreme caution when changing di-

rection on slopes.

– Use extreme caution when stepping back or 

pulling the machine towards you.

f

Never rake/verticut by pulling the machine 
towards you.

f

Stop the machine if the machine has to be 
tilted for transportation when crossing sur-
faces other than grass and when transport-
ing the machine to and from the area to be 
raked/verticut.

f

Never operate the machine without the 
catcher or deflector guard in position.

f

Switch on the motor according to the in-
structions with feet well away from rotating 
parts.

f

Do not tilt the machine when starting or 
switching on the motor, except if the ma-
chine has to be tilted for starting in long 
grass. In this case, do not tilt if more than ab-
solutely necessary and tilt only the part 
which is away from the operator. Always en-
sure that both hands are in the operating po-
sition before returning the machine to the 
ground.

f

Do not put hands or feet near or under rotat-
ing parts.

f

Always stand clear of the discharge zone 
when operating the machine.

f

Never pick up or carry the machine while the 
motor is running.

f

Be careful during adjustment of the machine 
to prevent entrapment of the feet and hands 
between moving tines/blades and fixed parts 
of the machine.

f

Regularly inspect the supply cable and any 
extension cables. Do not connect damaged 
cables to the supply or touch a damaged ca-
ble before it is disconnected from the sup-
ply. 

A damaged cable can lead to contact 

with live parts. Beware electric shock hazard.

f

Do not touch the tines before the machine is 
disconnected from the supply and the tines 
have come to a complete stop.

f

Keep supply cables and extension cables 
away from the tines. 

The tines can cause 

damage to the cables and lead to contact 
with live parts. Beware electric shock hazard.

Remove the plug from the socket:

– whenever you leave the machine,
– before clearing a blockage,
– before checking, cleaning or working on the 

machine,

– after striking a foreign object. Inspect the 

machine for damage and make repairs as 
necessary,

– if the machine starts to vibrate abnormally 

(check immediately).

Maintenance

f

Keep all nuts, bolts and screws tight to be 
sure that the machine is in safe working con-
dition.

f

Check the catcher frequently for wear or de-
terioration.

f

Examine the machine and replace worn or 
damaged parts for safety.

f

Ensure replacement parts fitted are Bosch 
approved.

f

Always wear gardening gloves when handling 
or working near the sharp tines/blade.

Power supply

f

The voltage indicated on the rating plate 
must correspond to the voltage of the power 
source.

f

We recommend that this equipment is only 
connected into a socket which is protected 
by a circuit-breaker that would be actuated 
by a 30 mA residual current.

OBJ_BUCH-835-002.book  Page 18  Friday, October 10, 2008  8:40 AM