Kuppersberg 60 X - Инструкция по эксплуатации - Страница 18

18

TECHNICAL PASSPORT

ENGLISH

Cooker hood

1.5 

Considering the type of instal-

lation above a kitchen range, two opera-

tion modes can be selected:

Â

air exhaust with corrugated alu-

minium/plastic air ducts 

(Ø 150 mm or 

120 mm) into a stationary kitchen air 

shaft (chimney) (see section 5 );

Â

recirculation (closed-loop kitch-

en air circulation) when a cooker hood 

is not connected to a chimney; air is 

forced through an aluminium grease 

filter (supplied with the hood) and a op

-

tional odor-absorbing carbon filter and, 

finally, returns to a kitchen 

(Fig. 2).

1.6 

CA U T I O N! Before installing 

a cooker hood connect it to the mains 

power supply and check all its functions 

to ensure technical serviceability.

1.7  We recommend that all work 

on the installation, connection and re-

pair of your cooker hood be performed 

only  by  qualified  specialists  who  are 

professionally engaged in such work.

1.8  The manufacturer is not re-

sponsible for any failure or damage 

caused by improper installation, opera-

tion or repair.

1.9  The manufacturer reserves the 

right to make changes in design of the 

appliance in order to improve its quality 

and performance.

1.10  See  technical  specifications  in 

the User Manual and on the label locat-

ed on an interior surface of the cooker 

hood

 (remove filters to access).

1.11 CA U T I O N!  Install the cooker 

hood on a wall at 650-750 mm above 

an electric stove. As for a gas stove, 

install the appliance at 750-850 mm 

above a cooktop (Fig. 1).