Вытяжки Elica Getup BL MAT/A/90 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
33
Operation
Control Display A
P1.
Intake panel opening/closing button
P2.
Light ON/OFF button
P3.
WiFi connection button
P1. Intake panel opening/closing button
If the panel is CLOSED, by pressing button P1, the hood will
turn on and the intake panel will be raised.
This operation will also give access to
control display
B,
which manages motor and lighting.
If the panel is OPEN, by pressing button P1, the hood will turn
off and the intake panel will be closed. This operation stops all
active motor and lighting functions immediately.
Note:
With the panel closed or while it is moving, control
display B will remain deactivated. When the panel is
completely open, it will be possible to use display B.
P2. Light ON/OFF button
If the panel is CLOSED, by pressing button P2, the hood will
turn on, the intake panel will be raised and the lights will turn
on only when the pull-out hood is completely open.
If the panel is OPEN, it will only be possible to turn the hood
lights on and off.
Note:
Light button P2 does not manage Light Dimming and
does not turn the hood off.
P3. WiFi button
•
WiFi configuration:
if the WiFi function is not configured,
press for about 2 seconds to enter WiFi configuration mode
and follow the instructions on the App to complete the
procedure.
During the configuration procedure, the button will light up
indicating the connectivity status (see WiFi status table)
To interrupt the WiFi configuration procedure, press for about
2 seconds when the button is lit up and is flashing fast.
Once the WiFi function has been configured, if you want to
change it, press for about 6 seconds to reset the WiFi
parameters (the button will turn off) and repeat the
configuration procedure.
•
WiFi activation/deactivation:
after the configuration, it is
possible to deactivate/activate the WiFi function. Press for
about 2 seconds to deactivate/activate the WiFi function.
Deactivating the function does not cause the loss of the WiFi
parameters.
WiFi status table
WiFi button
Device connection status
Light off
WiFi not configured or off
Light on steady
WiFi connected
Light flashing fast
Attempt to connect to the
WiFi router
Light flashing
slowly
Attempt to connect to the
Elica cloud
Light on with short
flashing light
Remote command being
received (e.g. engine
ignition or light turned on)
Control Display B
T1.
Light ON/OFF button
T2 .
Decrease intake speed / motor off button
L1.
Speed indicator LED on
T3.
Motor on / increase intake speed button
T4 .
"BOOST” –
intensive speed - function button
T1:
Light ON/OFF button
to turn the light on and off.
Press and hold button T1 to increase / decrease the intensity
of the light.
