De Dietrich DHT1146X - Инструкция по эксплуатации - Страница 39

39 

version of the hood must be installed. Do not use the hood 
without fat filters. 
Do not use steam or pressure cleaning equipment on your 
apparatus (for reasons of electrical safety).  

WARNING! 

Do not connect the appliance to the mains until 

the installation is fully complete.  
Before any cleaning or maintenance operation, disconnect 
hood from the mains by removing the plug or disconnecting 
the mains electrical supply.  
Always wear work gloves for all installation and maintenance 
operations. 
The appliance is not intended for use by children or persons 
with impaired physical, sensorial or mental faculties, or if 
lacking in experience or knowledge, unless they are under 
supervision or have been trained in the use of the appliance 
by a person responsible for their safety. 
This appliance is designed to be operated by adults, children 
should be monitored to ensure that they do not play with the 
appliance. 
This appliance is designed to be operated by adults.  Children 
should not be allowed to tamper with the controls or play with 
the appliance. 
Never use the hood without effectively mounted grating! 
The hood must NEVER be used as a support surface unless 
specifically indicated. 
The premises where the appliance is installed must be 
sufficiently ventilated, when the kitchen hood is used together 
with other gas combustion devices or other fuels.  
The ducting system for this appliance must not be connected 
to any existing ventilation system which is being used for any 
other purpose such as discharging exhaust fumes from 
appliances burning gas or other fuels.  
The flaming of foods beneath the hood itself is severely 
prohibited. 
The use of exposed flames is detrimental to the filters and 
may cause a fire risk, and must therefore be avoided in all 
circumstances.  
Any frying must be done with care in order to make sure that 
the oil does not overheat and ignite. 
Accessible parts of the hood may became hot when used with 
cooking appliance. 
With regards to the technical and safety measures to be 
adopted for fume discharging it is important to closely follow 
the regulations provided by the local authorities. 
The hood must be regularly cleaned on both the inside and 
outside (AT LEAST ONCE A MONTH). 
This must be completed in accordance with the maintenance 
instructions provided in this manual). Failure to follow the 
instructions provided in this user guide regarding the cleaning 
of the hood and filters will lead to the risk of fires. 
Do not use or leave the hood without the lamp correctly 
mounted due to the possible risk of electric shocks. 
We will not accept any responsibility for any faults, damage or 
fires caused to the appliance as a result of the non-
observance of the instructions included in this manual. 

Installation 

The minimum distance between the supporting surface for the 

cooking equipment on the hob and the lowest part of the 
range hood must be not less than 43cm from electric cookers 
and 65cm from gas or mixed cookers. 
If the instructions for installation for the gas hob specify a 
greater distance, this must be adhered to. 

  Electrical connection 

The mains power supply must correspond to the rating 
indicated on the plate situated inside the hood. If provided with 
a plug connect the hood to a socket in compliance with current 
regulations and positioned in an accessible area, after 
installation. If it not fitted with a plug (direct mains connection) 
or if the plug is not located in an accessible area, after 
installation,  apply a double pole switch in accordance with 
standards which assures the complete disconnection of the 
mains under conditions relating to over-current category III, in 
accordance with installation instructions. 

Warning!

 Before re-connecting the hood circuit to the mains 

supply and checking the efficient function, always check that 
the mains cable is correctly assembled. 

Mounting 

Before beginning installation: 

• 

Check that the product purchased is of a suitable size for 
the chosen installation area. 

•  Remove the charcoal (*) filter/s if supplied (see also 

relative paragraph). This/these is/are to be mounted only 
if you want lo use the hood in the filtering version. 

•  Check (for transport reasons) that there is no other 

supplied material inside the hood (e.g. packets with 
screws (*), guarantees (*), etc.), eventually removing 
them and keeping them. 

• 

If possible, disconnect and move freestanding or slide-in 
range from cabinet opening to provide easier access to 
rear wall/ceiling. Otherwise put a thick, protective 
covering over countertop, cooktop or range to protect 
from damage and debris. Select a flat surface for 
assembling the unit. Cover that surface with a protective 
covering and place all canopy hood parts and hardware 
in it. 

• 

In addition check whether near the installation area of the 
hood (in the area accessible also with the hood mounted) 
an electric socket is available and it is possible to 
connect a fumes discharge device to the outside (only 
suction version).  

•  Carry out all the masonry work necessary (e.g. 

installation of an electric socket and/or a hole for the 
passage of the discharge tube). 

  
Expansion wall plugs are provided to secure the hood to most 
types of walls/ceilings. However, a qualified technician must 
verify suitability of the materials in accordance with the type of 
wall/ceiling. The wall/ceiling must be strong enough to take 
the weight of the hood. 

Do not tile, grout or silicone this 

appliance to the wall. Surface mounting only. 

  
This hood is designed for fitting in a cabinet or on some other 
support.