Clage S 15-U 4100-42153 - Инструкция по эксплуатации - Страница 26

S 10  /  S 15

26

14. Troubleshooting and service

CLAGE GmbH 

Central Customer Service
Pirolweg 1 – 5, 21337 Lüneburg, Germany
Tel.: (+49) 4131 89 01- 40
Fax: (+49) 4131 89 01- 41
E-Mail: service @ clage.de

Problem

Remedy

Water does not flow

check and open main water tap, service valve, shut off valve 
if necessary
check fittings and hose connections

Little water flows

check water pressure (< 1.5 bar)
clean jet nozzle at outlet, clean micro-filter
in service valve / relief valve if necessary

Water does not heat 
up

check fuse and electrical connection
check temperature setting on appliance
call customer service department to check thermal cut-out, 
thermostat or heating element if necessary

Water not hot enough

check temperature setting on appliance
check temperature limitation
too much hot water may have been withdrawn within a 
short space of time, wait for the water to heat up again

Steam emerges

have the appliance checked by a customer service engineer

Short-circuit  
(fuse tripped)

have the appliance and its installation checked by a 
customer service engineer

No expansion water

pull out the main plug and contact the customer service.

Repairs must only be carried out by 
authorised professionals.
If a fault in your appliance cannot be 
rectified with the aid of this table, 
please contact the service organisa-
tion of your importer or the Central 
Customer Service Department. Please 
have the details of the typeplate at 
hand.

If the connection cable is damaged, it must be replaced with an original spare cable 
from the manufacturer by an authorised technician in order to avoid any hazards.
If you cannot rectify the fault with the aid of the troubleshooting table, please contact 
the custo mer service.

www.clage

-

com.ru