Весы Beurer BF 950 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
25
•
If your weight and body fat percentage both fall at the same time, then your diet is working – you are
losing fat mass.
•
Ideally, you should support your diet with physical activity, fitness or strength training. This enables
you to increase your muscle percentage in the medium term.
•
Body fat, body water and muscle percentages should not be totalled (muscle tissue also contains
components made of body water).
10. additional information
User assignment
It is possible to assign up to 8 scale users for a weight-only measurement (with shoes) and for a diagnosis
measurement (bare feet). User assignment is not possible with the tare function.
For a new measurement, the scale assigns the measurement to the user whose most recently saved
measurement falls within +/– 3kg of this. See chapter 8.
Storing the assigned measurements on the scale and transferring them to the app.
If the app is not open, the newly assigned measurements are saved on the scale. A total of 30 measure-
ments per user can be saved on the scale. The saved measurements are transferred automatically to the
app when you open the app within the Bluetooth range.
Deleting scale data
•
Delete all
Briefly apply pressure to the scale; the time and temperature are displayed. Hold down the Unit/
Delete/Reset button on the rear of the scale for approx. 6 seconds. “CLr” will appear on the display
for several seconds.
All saved values and settings are deleted.
•
Delete individual users
Briefly apply pressure to the scale twice until “0.0” appears. Press the “
” buttons to select your
user. When “0.0” and your initials are displayed, hold down the Unit/Delete/Reset button on the rear
of the scale for approx. 3 seconds. “dEL” appears on the display.
This user is deleted.
changing the batteries
Your scale is equipped with a low battery indicator. If you operate the scale with flat batteries, "Lo" will
appear on the display and the scale will automatically switch off. In this case, the batteries must be
replaced (4 x 1.5 V AAA). All saved measurements and users remain saved.
Connect the scale to the app again. The system time is updated.
NOTE:
•
When changing the batteries, use batteries of the same type, make and capacity.
•
Do not use rechargeable batteries.
•
Use batteries free from heavy metals.
11. cleaning and maintaining the device
The device should be cleaned from time to time.
This should be done using a damp cloth and, if necessary, a small amount of detergent.
IMPORTaNT
•
Never use harsh solvents or cleaning agents!
•
Never submerge the device in water!
•
Do not clean the device in the dishwasher.
