VDO MC1 0 - Инструкция по эксплуатации - Страница 35

19

GB

MC

1.0

6.2 Correction of actual altitude

While you ride, the airpressure changes due to your gain in altitude as well as due to a wether change.To correct that influence of the wether change you 
can also adjust the actual altitude display at your MC 1.0.Should you see a sign indicating actual altitude and should this altitude differ from the display 
readout at your MC 1.0, you can manually correct the actual altitude.

Step 1: Get any of the ALTI-informations in display
Step 2: Press the ALTI-button for 3 sec, the display will show “ENTER REAL ALTITUDE” and the actual value of the altitude.
Step 3: MODE 1 will decrease the value , MODE 2 will increase the value.
Step 4: After you have entered the corect real altitude, you leave the setting procedure by pressing ALTI-button for 3 sec.

7. Troubleshooting

This chart outlines possible malfunctions, their causes and removal.

malfunctions

most likely cause

removal solutions

irregular LCD readout

computer software is not

press AC-button at the rear of computer head to reset 

(i.e. after battery change)

running smoothly

no speed display

check for proper distance between

readjust sender and magnet 

sender and magnet
battery in sender is empty

check battery and replace if necessary.

computerhead is incorrectly twisted

place computerhead on handlebar holder and twist  

onto handlebarholder

until detent (CLICK)

no wheelsize value entered

enter wheelsize number

Display fades or disappears

battery in computer empty

check battery and replace if necessary.

temperatures below -15

°

C (40

°

F)

Back in normal temperatures, display picks up working correctly. 

dull display readout

No altitude readout 

computer in sleep-mode, not activated

press any button to activate computer

No altitude climbed indication

no speed impulses processed

see infomation "no speed display" above