Велокомпьютеры VDO HC12 6 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
9. Setting of pulse limits
With your VDO HC 12.6 you determine upper and lower limits for your pulse / heart rate to define your training zone.
During initial setup or when the AC-button at the rear of the housing has been pressed, following values apply by default:
• Lower limit LO 80
• Upper limit HI 140
Step 1: Call any pulse information into display by pressing the PULSE button.
Step 2: Press MODE 1 for 3 sec. The lower part of the display alternately shows "ENTER and HIGH LIMIT" plus the number "140" or the value
you have last entered. The middle part of the display shows "HI" and the respective value
Step 3: By pressing MODE 2 you can change this value, pressing once increases by 1, constant pressing increases by increments of 5, i.e. up to 160.
Upper limit may be set from 80 to 220 beats per minute. Exceeding 220, setup will start anew at 80.
Step 4: Once your upper limit is set, i.e. 160, MODE 1 will compulsorily take you to setup your lower limit.
The lower part of the display alternately shows "ENTER and LOW LIMIT" plus the number "150" (= set value for upper limit minus 10).
The middle part of the display shows "LO" and the respective value, here "150".
Step 5: By pressing MODE 2 you can change this value, pressing once decreases by 1, constant pressing decreases by increments of 5, i.e. "145".
Step 6: Once you have set up your lower limit, you may exit setup by pressing MODE 1 for 3 sec.
Preset values for your upper and lower pulse limits are permanentely displayed in the middle part of the LCD. (HI and LO)
P18
GB
HC
12.6
13
