VDO HC12 6 - Инструкция по эксплуатации - Страница 29

4.5 Presetting the odometer

After a battery change, you can re-enter previous odometer values (for both bikes) into your VDO HC 12.6.

Step 1:  With MODE 2 call "ODO1 METER" or "ODO2 METER" into display, depending which one of these values you want to re-enter.
Step 2:  Press MODE 1 for 3 sec. The lower part of the display alternately shows "ENTER ODO1 METER" or "ENTER ODO2 METER" plus the

respective value with the last number flashing.

Step 3:  With MODE 2 you increase the number, with MODE 1 you jump to the next number etc.
Step 4:  Once you have entered your values for ODOMETER 1 and ODOMETER 2, you exit set-up mode by pressing MODE 1 for 3 sec.

P15

5. Service Interval Indicator

Your VDO HC 12.6 features a Service Interval Indicator to remind you to have your bike serviced at your trusted bike shop.The service interval reminder is
indicated separately for both your bikes. Every 750 km / 468 mi, the service icon is activated. The service icon flashes and the lower part of the display
shows "BIKE CHECK"
By pressing any of the buttons, the "BIKE CHECK" information disappears. Other information can still be reviewed. The service icon will remain flashing.

After another 50 km / 35 mi, the service interval icon will also disappear.

P16

6. Sleep-Mode

Your VDO HC 12.6 features SLEEP-Mode. During SLEEP-Mode the display is shut down. The clock and, if activated, the service interval icon, remain displayed.

Additionally, the internal receiver for pulse signals is also shut down in order to save battery power!

Your VDO HC 12.6 automatically goes into SLEEP-Mode after 5 min if

SLEEP-Mode is terminated if

• no buttons are pressed

• any button is pressed

• no speed impulses are processed

• speed impulses are processed

• no pulse signals are received

Warning:

  If you want pulse signals to be received and processed while you are off your bike, the SLEEP-Mode must be cancelled by switching the computer

on / pressing any button.

GB

HC

12.6

11