Варочная панель Zigmund & Shtain CIS 029.45 BX - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
10
USE
(Fig.8)
F
F
E
B
A
D
C
A- ON/OFF key
> switch the appliance on
and off
B- Lock key
> activate control panel lock /
child lock
C- Plus key
> increase power level of the
cooking zone
D- Minus key
> reduce power level of the
cooking zone
E- Display area
> shows the values set for
the cooking zone
F
-
Cooking Zone
>
select and activate the
desired cooking zone
SWITCHING THE COOKING TOP
ON
Press the on-off key to switch the
appliance on. The displays will turn on in
the stand-by
«
.
»
position.
The control unit remains active for 10
seconds.
If no cooking zone is selected within
this time, the cooking top switches off
automatically.
SWITCHING THE COOKING AREA ON
Press the relative key to select the
desired cooking zone and press the or
key within 10 seconds to set the power
level.
The power of the single cooking zone can
be adjusted in
9
different positions and will
be shown on luminous display
B
with a
number from “1 to 9”.
QUICK / BOOSTER HEATING
«
P
»
This function further reduces cooking time
in a given area taking the temperature
to the maximum power for a 10 minute
interval. At the end of this interval, the
cooking area power automatically returns
to level 9.
The use of this function is recommended
for heating a large quantity of liquid in a
very short time (i.e. water for cooking
pasta) or other dishes. To activate this
function, select the cooking area and press
the key up to level 9. Press the key
again. An acoustic signal will be emitted
and a symbol
«
P
»
will be visualised on the
display E relative to the area.
RESIDUAL HEAT
«
H
»
If the temperature of the cooking area is still
high (over 50°) after it has been switched
off, the relative display will indicate the
«
H
»
symbol (residual heat). The symbol will
only switch off when the burn risk in no
longer present.
POT DETECTION
«
u
»
If the symbol
«
u
»
should appear on one of
the cooking area displays, it means that:
1)
The recipient being used is not suitable
for induction cooking.
2)
The diameter of the recipient used is
inferior to that allowed by the appliance.
3)
No recipient is present.
TIMER
«
t
»
This function allows you to set the time (from
«
01
»
to
«
99
»
minutes) to automatically
switch off of the selected cooking zone.
Select a cooking zone by pressing one of
the
F
keys and set the power by pressing
the
C
or
D
keys.
To activate the timer press again the F key,
an acustic signal will be heard and the
«
t
»
symbol will appear on the display of the
selected cooking zone.
Set the time by pressing the
C
or
D
keys.
If the cooking zone is in the lower part of
the cooktop the time will be shown on the
display of the cooking zone in the upper
part of the cooktop and vice versa. Press
the key
F
again to confirm your selection.
When the timer function elapses, the
cooking zone will automatically switch off
and an acoustic signal will be heard.
To disable the timer function, press the
F
key on the cooking zone previously started,
bring the timer value back to
«
00
»
by using
the
D
key, then press the
B
key again to
confirm your selection.
