Vestel VHI64371B - Инструкция по эксплуатации - Страница 40

EN - 19

6. TROUBLESHOOTING&TRANSPORT

6.1 troubleShootinG

If you still have a problem with your appliance after checking these basic troubleshooting 

steps, please contact an authorised service person or qualified technician.

Problem

Possible Cause

Solution

Hob control card’s display is 

blacked out. The hob or cooking 

zones cannot be switched on.

There is no power supply.

Check the household fuse for the 

appliance.

Check whether there is a power cut by 

trying other electronic appliances.

The hob switches off while it is in 

use and an 'F' flashes on each 

display.

The controls are damp or an object 

is resting on them.

Dry the controls or remove the object.

The hob switches off while it is 

use.

One of the cooking zones has been 

on for too long.

You can use the cooking zone again 

by switching it back on.

The hob controls are not working 

and the child lock LED is on.

Child lock is active.

Switch off the child lock.

The saucepans make noise 

during cooking or your hob makes 

a clicking sound during cooking.

This is normal with induction hob 

cookware. This is caused by the 

transfer of energy from the hob to 

the cookware.

This is normal. There is no risk, 

neither to your hob nor to your 

cookware.

The 'U' symbol lights up in the 

display of one of the cooking 

zones.

There is no pan on the cooking 

zone, or the pan is unsuitable.

Use a suitable pan.

Power level 9 or 'P' is 

automatically reduced. If you 

select power level 'P' or 9 on two  

cooking zones, which are on the 

same side, at the same time.

Maximum power level for the two 

zones is reached

Operating both zones at power level 

'P' or 9 would exceed the permitted 

maximum power level for the two 

zones.

6.2 tranSport

If you need to transport the product, use the original product packaging and carry it using 

its original case. Follow the transport signs on the packaging. Tape all independent parts to 

the product to prevent damaging the product during transport.

If you do not have the original packaging, prepare a carriage box so that the appliance, 

especially the external surfaces of the product, is protected against external threats.