Vestel VHI64371B - Инструкция по эксплуатации - Страница 37

EN - 16

using the left side of the sliding button, turn 

the level down to “

0

”. If the bridge cooking 

zone is hot, “

H

” will be displayed.

Special Cooking Modes

Press and release the heater selection 

button to cycle through the boiling, frying, 

keep-warm and chocolate-melting special 

cooking functions. Special cooking 

functions are only available on the right side 

of the hob. Boiling and frying cannot be 

selected simultaneously until after one beep 

is heard from the hob.

Boiling Function

This function is used to boil water and 

keep the temperature close to boiling point. 

To activate the boiling function, press the 

heater selection button twice. When the 

boiling function has been activated, the 

corresponding display will show 

‘b’

. The 

hob will beep to indicate when the water 

has boiled and the water will then simmer.

The above image shows the front right 

heater display indicating the boiling 

function.

Frying Function

This function will fry oil at around 160°C. 

To activate this function, press the heater 

selection button three times. When the 

frying function has been activated, the 

corresponding display will show 

‘F’

.The hob 

will beep when the oil is ready for frying.

In the image above, the front right heater 

display is indicating the frying function.

Keep-Warm Function

This function allows the temperature of 

food to be kept at around 50°C. To activate 

the keep-warm function, press the heater 

selection button four times. When the 

keep-warm function has been activated, the 

corresponding display will show 

‘u’

.

The above image shows the front right 

heater display indicating the keep-warm 

function.

Chocolate-Melting Function

This function melts chocolate or similar 

foods at around 40°C. To activate the 

chocolate-melting function, press the 

heater selection button five times. When 

the chocolate-melting function has been 

activated, the corresponding display will 

show 

‘c’

.

In the image above, the front right heater 

display is indicating the chocolate-melting 

function.

Performance and time may vary 

according to the quantity of food in the 

pan and the quality of the pan. 1.5 

litres of water or 0.5 litres of oil gives the 

best cooking performance with these 

functions.

Error Codes

If there is an error, an error code will be shown on the 

heater displays.

E1

Cooling Fan is disabled. Call an authorised 

service agent.

E3

Supply voltage is other than the rated values. 

Switch the hob off by pressing  ,wait until 

“

H

” disappears for all zones, switch the hob 

on by pressing   and continue to use. If 

the same error is displayed again, call an 

authorised service agent.