Vestel VHI64371B - Инструкция по эксплуатации - Страница 35

EN - 14

9-

 Sliding Buttons

10-

 Boost

11- 

On/Off

Use the induction cooking zones with 

suitable cookware.

After mains voltage is applied, all displays 

are illuminated briefly. After this, the hob is 

in stand-by mode and ready for operation.

The hob is controlled by pressing the 

appropriate electronic button. Each button 

pressed is followed by a buzzer sound.

Switching the Appliance On

Switch the hob on by pressing the ON/OFF 

button   . All heater displays will show a 

static “

0

” and the bottom right dots blink. 

(If a cooking zone is not selected within 20 

seconds, the hob will automatically switch 

off).

Switching the Appliance Off

Switch the hob off at any time by pressing 

.

The ON/OFF button   always has priority 

over the switch-off function.

Switching the Cooking Zones On

Press the heater selection button that 

corresponds to the heater you wish to use. 

A static dot will be shown on the selected 

heater display and the blinking dots on 

all other heater displays will no longer 

illuminate.

For the selected heater, you can set the 

heat level by pressing the Sliding Button 

 The element is now ready to 

use. For fast boil times, select the desired 

cooking level, then press the “

P

” button to 

activate the Boost function.

Switching the Cooking Zones Off

Select the element you want to switch off 

by pressing the heater selection key. Using 

the Sliding Button 

 , turn the 

temperature down to “

0

”. (Pressing the right 

and left of the slider button simultaneously 

also turns the temperature to “

0

”).

If the cooking zone is hot, “

H

” will be 

displayed instead of “

0

”.

Switching all Cooking Zones Off

To switch all the cooking zones off at once, 

press the   key.

In stand-by mode, a “

H

” will appear on all 

cooking zones which are hot.

Residual Heat Indicator

The residual heat indicator indicates that 

the glass ceramic area has a temperature 

that is dangerous to touch.

After switching off the cooking zone, the 

respective display will show “

H

” until the 

corresponding cooking zone temperature is 

at a safe level.

Smart Pause

Smart Pause, when activated, reduces 

the power of all burners that have been 

switched on.

If you then deactivate the Smart Pause, 

the heaters will automatically return to the 

previous temperature level.

If the Smart Pause is not de-activated, the 

cooktop will switch off after 30 minutes.

Press     to activate Smart Pause. The 

power for the activated heater(s) will reduce 

to level 1 and “

II

” will appear at all displays.

Press     again to deactivate Smart 

Pause. “

II

” will disappear and the heaters 

will now run at the level previously set.

Safety Switch-Off Function

A cooking zone will automatically switch off 

if the heat setting has not been modified 

for a specified duration of time. A change 

in the heat setting of the cooking zone will 

reset the time duration to the initial value. 

This initial value depends on the selected 

temperature level, as shown below.

Heat setting 

Safety switch off after

1-2

6 Hours

3-4

5 Hours

5

4 Hours

6-9

1.5 Hours

Child Lock

After switching on the appliance, the child 

lock function can be activated. To activate 

the child lock, simultaneously press the 

left and right side of the Sliding Button 

 and then press the right side 

of the Sliding Button 

 again. “

L

” 

indicating LOCKED will appear on all heater 

displays and the controls can not be used. 

(If a cooking zone is in the hot condition, 

“

L

”and “

H

” will display alternately).

The hob will remain in a locked condition 

until it is unlocked, even if the appliance 

has been switched off and on.

To deactivate the child lock, first switch on 

the hob. Simultaneously press the left and 

right side of the Sliding Button 

and then press the left side of the Sliding 

Button 

 again. “

L

” will no longer