Bertazzoni PM36 3 I0 X - Инструкция по эксплуатации - Страница 7

7

SERVICE & MAINTENANCE INSTRUCTIONS 

Service and maintenance only to be carried out by an authorised person 

To replace parts such as burners, valves and electric components, the hotplate must be removed from the 
bench top by releasing the attachment hooks, loosening the attachment screws of each burner, unscrewing 
the hotplate attachments nuts which are visible at the bottom of the surface, removing the hotplate top and 
finally replacing the defective parts. 

Note:

 if the valves must be replaced, first disassemble the ignitions switches wires. 

It is recommended to replace the valve gaskets each time the valve is replaced, thus ensuring a perfect seal 
between the body and the gas train. 

WARNING: Disconnect power before servicing unit. 

For the location of the wall receptable for the connection of the three-pin earthed plug of the 
appliance, see indications given in Fig. 1- 2  
WARNING: After first installation of the appliance or after any service intervention concerning main 
gas parts of the appliance, make the leak test using water with soap on the gas connections in order

USER INSTRUCTIONS 

IMPORTANT SAFETY INSTRUCTIONS  

1 - Proper Installation - Be sure your appliance is properly grounded and installed by a qualified technician.  
 
2 - Never Use your Appliance for Warming or Heating the Room.  
 
3 - Do Not Leave Children Alone - Children should not be left alone or unattended in an area where 
appliance is in use. They should never be allowed to sit or stand on any part of the appliance.  
 
4 - Wear Proper Apparel  - Loose-fitting or hanging garments should never be worn while using the 
appliance.  
 
5 - User Servicing - Do not repair or replace any part of the appliance unless specifically recommended in 
the manual.  All other servicing should be referred to a qualified technician.  
 
6 - Storage in or on Appliance - Flammable materials should not be stored near surface units.  
 
7 - Do Not Use Water on Grease Fires - Smother fire or flame or use dry chemical or foam-type extinguisher.  
 
8 - Use Only Dry Potholders - Moist or damp potholders on hot surfaces may result in burns from steam. Do 
not let potholder touch hot heating elements.  Do not use a towel or other bulky cloth.  
 
9 - Use Proper Pan Size - This appliance is equipped with several, differently sized, induction elements. 
Select cookware having flat bottoms, large enough to cover the surface unit heating element.  Proper size 
pots and pans will also improve efficiency.  
 
10 - DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS - Surface units may be hot even though 
they are dark in color. Areas near surface units may become hot enough to cause burns.  
 
11. Do Not Heat Unopened Food Containers - Build-up of pressure may cause container to burst and result 
in injury..  
 
12. Never Leave Surface Units Unattended at High Heat Settings - Boil-over causes smoking and greasy 
spillovers that may ignite.  
 
13. Do not use aluminum foil, aluminum liners or aluminum containers on the unit.  
 
14. Cookware Handles Should Be Turned inward and Not Extend Over Adjacent Surface Units - To reduce  
the risk of burns, and spillage due to unintentional contact with a pot/pan, which is used for cooking, the 
handle of the piece should be positioned so that it is turned inward, and does not extend over adjacent 
surface units.