Bertazzoni PM36 3 I0 X - Инструкция по эксплуатации - Страница 14

14

Cleaning the stainless steel parts:

 Clean the parts with soapy water and dry them with a soft cloth. The 

shine is maintained by periodically using suitable products which can be found in the supermarket. Never 
use abrasive powders. 

Cleaning the burner caps:

 Lift the burner caps from the burner heads and wash them in soapy water and 

dry thoroughly. Before replacement on the burner head ensure that the holes are not clogged. 

Cleaning the glass ceramic: Warning: 

Do not use any kind of cleaner on the glass while the surface is hot, 

use only the razor blade scraper. The resulting fumes can be  hazardous to your health. Heating the cleaner 
can chemically attack and damage the surface. 

Clean the surface when it is completely cool with the following exception: remove dry sugar, sugar syrup, 
tomato products and milk immediately with the razor blade scraper. 

Wipe off spatters with a clean, damp sponge or a paper towel. Rinse and dry. Use white vinegar if smudge 
remains; rinse. 

Apply a small amount of the glass ceramic cooktop cleaner. When dry, buff surface with a clean paper towel 
or cloth. 

TYPE OF STAIN   

WHAT TO DO   

ACCESSORIES or AGENTS 
EMPLOYED  

Minor 

  Soak the area to be cleaned with soapy 
water, then wipe it.   

Cleaning sponges & mild 
detergents   

Accumulated burnt-on 
stains  

Soak the area to be cleaned with warm 
soapy water. Use a special scraper for 
vitroceramic glass to remove grease and 
food particles. Finish off with  a cleaning 
sponge, then wipe it clean.  

Cleaning sponges, mild 
detergents and cleaning agents 
for vitroceramic glass  
 

 
Rings and traces of lime 
scale  

Apply warm white vinegar on the stain. Let 
it sit, then wipe off with a soft cloth.  
OR  
Use a commercial cleaner on affected 
area. Note that such cleaner may leave 
stains on stainless steel frame, thus  
protect exposed stainless steel.  

Cleaning cloth, white vinegar, or 
diluted descaling agent.  
 

Burnt-on stains following  
sugar spillage, melted  
aluminum or plastic.  

- Apply special vitroceramic glass cleaner 
on the surface, preferably one which 
contains silicone (protective action).let it 
sit, then finish off with a cleaning sponge, 
then wipe it clean. 

Vitroceramic cleaning agents and 
sponge.  
 

Allowable: 

Non-abrasive Paste - Ordinary Sponge or Special Sponge for Delicate Items  

Not allowable: 

Abrasive-backed sponge - Powder