Smeg SRV876AVOGH - Инструкция по эксплуатации - Страница 8

Instructions for the installer 

28

4.1

Connection to LPG 

 Use a pressure regulator and make the connection to the tank 

according to the provisions of standards regulations in force. Make 
sure that feed pressure conforms to the levels shown in the table in 
paragraph “5.2  Regulation for LPG”. 

4.2

Ventilation of rooms 

  The hob may be installed only in rooms with permanent ventilation, as 

required by standards regulations in force. The room in which the hob 
is installed must have sufficient air flow to satisfy the requirements of 
normal gas combustion and of necessary air exchange in the room. 
The air intakes, protected by screens, must be appropriately sized 
(regulations in force) and placed so as not to be blocked in any way. 
The room where the oven is installed should be suitably ventilated to 
avoid overheating or excess humidity produced by cooking, and in the 
case of lengthy use a window should be opened or the speed of any 
ventilators should be increased. 

4.3

Discharge of combustion products 

 Discharge of combustion products must be guaranteed by means of 

hoods connected to a natural draught flue with certain efficiency, or by 
means of forced aspiration. 

An efficient aspiration system requires careful planning by a specialist 
capable of installing it, respecting the positions and distances 
prescribed by standards. After installation, the installer must issue a 
certificate of conformity.