Smeg SRV876AVOGH - Инструкция по эксплуатации - Страница 18

Instructions for the user 

38

8.2

Cleaning of cooking hob components 

CAUTION: do not wash these components in a dishwasher. 

In normal use of the hob, the stainless steel burner caps and pan-

stands tend to be burnished by the high temperature.  Clean these 

parts using very fine abrasive sponges or similar commercial products. 

Then use a specific paste polish to restore the steel’s shine. Your local 
authorised after-sales technician is able to supply professional 

products for appliance cleaning and care. 

Grids, caps, flame cap crowns and burners can be 
removed for ease of cleaning. Wash them in warm 
water using a non-abrasive detergent, taking care to 
remove all tough spots. Before remounting, allow the 
components to fully dry out. In fact, humidity residues 
inside the burner holes might impair burner operation. 

8.2.1

Ignition plugs and safety devices 

For good functioning of the lighting ignition plugs and the safety 
devices, keep them very clean. 

Check frequently and clean with a damp cloth when necessary.

8.2.2

The cover 

Clean the glass or steel cover, where mounted, with warm water. 
Never use abrasive sponges or detergents.

Attention: the glass lid may break if overheated. Make sure that all the 

burners are switched off and let them cool down before lovering the lid. 

After cleaning, the appliance must be dried thoroughly since detergent 

and water drips might damage its operation and appearance.