Smeg SRV531X5 - Инструкция по эксплуатации - Страница 8

Instructions for the installer

29 

4.1

Connection to LPG 

Use a pressure regulator and make the connection to the tank according 
to the provisions of standards regulations in force. Make sure that feed 
pressure conforms to the levels shown in the table in paragraph “5.2 
Regulation for LPG”. 
 
 
 

4.2

Ventilation of rooms 

The hob may be installed only in rooms with permanent ventilation, as 
required by standards regulations in force. The room in which the hob is 
installed must have sufficient air flow to satisfy the requirements of 
normal gas combustion and of necessary air exchange in the room. The 
air intakes, protected by screens, must be appropriately sized 
(regulations in force) and placed so as not to be blocked in any way. 
The room where the oven is installed should be suitably ventilated to 
avoid overheating or excess humidity produced by cooking, and in the 
case of lengthy use a window should be opened or the speed of any 
ventilators should be increased. 

4.3

Discharge of combustion products 

Discharge of combustion products must be guaranteed by means of 
hoods connected to a natural draught flue with certain efficiency, or by 
means of forced aspiration. 
An efficient aspiration system requires careful planning by a specialist 
capable of installing it, respecting the positions and distances prescribed 
by standards. After installation, the installer must issue a certificate of 
conformity.