Smeg SRV531X5 - Инструкция по эксплуатации - Страница 20

Instructions for the user

41 

8.2

Cleaning of cooking hob components 

Grids, caps, flame cap crowns and burners can be 
removed for ease of cleaning. Wash them in warm 
water using a non-abrasive detergent, taking care 
to remove all tough spots. Before remounting, allow 
the components 

to fully dry out

. 

CAUTION: do not wash these components in a dishwasher. 

In normal use of the hob, the stainless steel burner caps and pan-stands 

tend to be burnished by the high temperature.  Clean these parts using 

very fine abrasive sponges or similar commercial products. Then use a 

specific paste polish to restore the steel’s shine. Your local authorised 
after-sales technician is able to supply professional products for 

appliance cleaning and care. 

8.2.1

Ignition plugs and safety devices 

For good functioning of the lighting ignition plugs and the safety devices, 
keep them very clean. 

Check frequently and clean with a damp cloth when necessary. 

8.2.2

The electric element 

After use, to make sure that the surfaces are clean and long lasting, the 
electric element must be treated with specific cleaning products which 
are available on the market. This necessary operation prevents 
oxidisation (rust formation). 

8.2.3

The cover 

Clean the glass or steel cover, where mounted, with warm water. Never 
use abrasive sponges or detergents. To clean the rear part of the 
cooktop, remove the cover by lifting out. 

When finished cleaning, refit the cover making sure to insert it correctly. 
Before lifting up the cover, dry out properly. 

Never lower the cover when burners or electric elements are on or 
still hot.