Smeg SRV531X5 - Инструкция по эксплуатации - Страница 7

Instructions for the installer

28

4.

GAS CONNECTION 

 
Connection to the gas mains may be made with a 

rigid copper pipe

 or 

with a 

flexible pipe

 and conforming to the provisions defined by standard 

regulations in force.  
To facilitate connection, fitting 

A

 on the rear of the appliance may be 

adjusted laterally. For this purpose, loosen hexagon nut 

B

, turn fitting 

A

to the desired position, and retighten hexagon nut 

B

 (tightness is ensured 

by a biconical brass ring). Use a soapy solution to check for proper 
tightness. Never use a free flame.  
The hob has been inspected for 

G20

 (2H) 

natural gas

 at a pressure of 

20 mbar. For use with other types of gases, see Section “5. 
ADAPTATION TO DIFFERENT TYPES OF GAS”. The gas intake fitting 
is ½” gas external threaded (ISO 228-1). 
 

Connection with rigid copper pipe: 

the connection to the gas mains must 
not provoke stress of any kind on the 
hob.  
Connection may be made by using 
biconical adapter 

D

 with insertion of 

gasket 

C

 (supplied). 

Connection with flexible pipe: 

use 

only flexible pipes conforming to 
standard regulations in force, inserting 
gasket 

C

 (supplied) between fitting 

A

and flexible pipe 

E

. 

The flexible pipe has to be installed so that pipe length does not exceed 

1.5 meters of maximum extension. Make sure that the pipes do not touch 

any moving parts or become damaged.