Smeg P652 - Инструкция по эксплуатации - Страница 8

Instructions for the user

25 

7.2

Hobs with push-buttons 

On first connection to the electrical mains, an operating check will be carried out automatically 
and all the indicator lights will come on for a few seconds. 

7.2.1

Single plates 

When not in use, all hob components will be switched off. If the   symbol of any 
push-button is pressed for a few seconds, the hob will switch on and the circular 
sectors on the buttons indicating the plate controlled by each button will 
illuminate. 
The power level must be set within 30 seconds after the sectors light up; 
otherwise the hob will switch off automatically. 
To set the power level use the   or   push-buttons as follows: 

1.

press the   (0 appears on the display: meaning that the plate has been 
switched on); 

2.

press the   (9 appears on the display: meaning that the plate is on at full 
power); 

3.

At this point; 

a.

Pressing the   symbol repeatedly regulates the plate's power setting 
from the full power level (9) towards the lowest setting (1); 

b.

Pressing the   symbol repeatedly regulates the plate's power setting 
from the lowest power level (1) to the highest setting (9); 

4.

To switch off the plate, return the display reading to 0 by pressing the   or 
symbol repeatedly. 

A "BEEP" of confirmation is heard whenever the   or   symbols are pressed. 

7.2.2

Dual plates 

Operation of plates with dual heating is different from that of those with single 
heating. When they are switched on, two indicator lights illuminate beside the 
number showing the power level, as shown in the diagram. 
When not in use, all hob components will be switched off. If the   symbol of any 
push-button is pressed for a few seconds, the hob will switch on and the circular 
sectors on the buttons indicating the plate controlled by each button will 
illuminate. 
The power level must be set within 30 seconds after the sectors light up; 
otherwise the hob will switch off automatically. 
To set the power level use the   or   push-buttons as follows: 

1.

press the   symbol (0 appears on the display, meaning that the plate is on at 
full power); 

2.

press the   symbol again (9 appears on the display, meaning that the small 
plate is on at full power); 

3.

There are now two options available: 

a.

•

press the   symbol once (two markers illuminate beside the 9); 

•

press the   symbol to set the power of the dual plate. 

or 

b.

•

after proceeding as described in point 2, press the the   symbol 
repeatedly to set the power of the small plate; 

4.

To switch off the plate, return the display reading to 0 by pressing the   
symbol repeatedly.