Smeg P652 - Инструкция по эксплуатации - Страница 11

Instructions for the user

28

8.

CLEANING AND MAINTENANCE 

Before any intervention, disconnect the power supply of the device. 

8.1

Cleaning the glazed ceramic hob 

The cooking hob should be regularly cleaned; best after every use, once the residual heat signal 
lamps have gone off. 

Smudges from aluminium-bottom pans can be easily cleaned off with a cloth 
dampened in vinegar. 
Remove any burnt residues after cooking with the scraper provided; rinse with water 
and wipe dry with a clean cloth. Regular use of the scraper considerably reduces the 
need for chemical detergents for the daily cleaning of the hob. 
Never use abrasive or corrosive detergents (e.g. cleaning powders, oven sprays, 
spot-removers, wire sponges). 

8.2

Cleaning stainless steel 

8.2.1

Ordinary Daily Cleaning 

To clean and preserve the stainless steel surfaces, always use 

only 

specific products that do not 

contain abrasives or chlorine-based acids. 

How to use:

 pour the product on a damp cloth and wipe the surface, rinse thoroughly and dry with a 

soft cloth or deerskin.

Do not use metallic sponges or sharp scrapers: they will damage the surface.  
Use normal non-abrasive products for steel, and a wooden or plastic tool if necessary. 

Rinse thoroughly and dry with a soft cloth or deerskin. 
Do not allow residues of sugary foods (such as jam) to set inside the oven.  If left to set for 
too long, they might damage the enamel lining of the oven. 

NEVER USE A STEAM JET TO CLEAN THE APPLIANCE. 

9.

SOMETHING WRONG? 

PROBLEM 

POSSIBLE CAUSES 

WHAT TO DO? 

The hob doesn’t work 

-

The hob is not wired in or 

-

Switch on at the wall 

switch on at the wall. 

-

There is a power failure 

-

Check power supply 

The results of cooking are 
unsatisfactory 

-

Temperature is too high or 

-

Consult cooking tips 

too low 

-

Wrong shelf position 

-

Wrong type of dish 

-

Cooking time is incorrect 

The hob smokes 

-

The hob is dirty 

-

Clean the hob once cooking 

is finished. Let it cool first. 

-

Food has spilled over 

-

Use a larger pan 

The plates do not come on 
during timed cooking 

-

Timed cooking programming 

-

Check the instruction for 

error. 

timer  

The front panel will light up but 
the plates will not switch on 

-

DEMO mode is now 

-

Refer to paragraph “7.2.11 

activated 

“DEMO” mode” for how to 
deactivate DEMO mode